For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LINEAR & POWER - SMT
1
HMC608LC4
v03.0514
GaAs pHEMT MEDIUM
POWER AMPLIFIER, 9.5 - 11.5 GHz
General Description
Features
Functional Diagram
The HMC608LC4 is a high dynamic range GaAs
pHEMT MMIC Medium Power Amplier housed in a
leadless “Pb free” SMT package. The amplier has
two modes of operation: high gain mode (Vpd pin
shorted to ground); and low gain mode (Vpd pin left
open). The electrical specications in the table below
are shown for the amplier operating in high gain
mode. Operating from 9.5 to 11.5 GHz, the amplier
provides 29.5 dB of gain, +27.5 dBm of saturated
power and 23% PAE from a +5V supply voltage.
Noise gure is 6 dB while output IP3 is +33 dBm. The
RF I/Os are DC blocked and matched to 50 Ohms
for ease of use. The HMC608LC4 eliminates the
need for wire bonding, allowing use of surface mount
manufacturing techniques.
Output IP3: +33 dBm
Saturated Power: +27.5 dBm @ 23% PAE
Gain: 29.5 dB
Supply: +5V @ 310 mA
50 Ohm Matched Input/Output
RoHS Compliant 4x4 mm SMT Package
Electrical Specications, T
A
= +25° C, Vdd1, 2, 3 = 5V, Idd = 310 mA
[1]
, Vpd = GND
[2]
Typical Applications
The HMC608LC4 is ideal for:
• Point-to-Point Radios
• Point-to-Multi-Point Radios
• Military End-Use
Parameter Min. Typ. Max. Units
Frequency Range 9.5 - 11.5 GHz
Gain
[3]
27 29.5 dB
Gain Variation Over Temperature 0.02 0.03 dB/ °C
Input Return Loss 13 dB
Output Return Loss 19 dB
Output Power for 1 dB Compression (P1dB) 23 27 dBm
Saturated Output Power (Psat) 27.5 dBm
Output Third Order Intercept (IP3) 33 dBm
Noise Figure 6.0 dB
Supply Current (Idd = Idd1 +Idd2 +Idd3)(Vdd = +5V, Vgg = -2.6V Typ.)
[3]
310 350 mA
[[1] Adjust Vgg between -3 to 0V to achieve Idd = 310 mA typical.
[2] Vpd= ground for high gain mode, Vpd = open for low gain mode.
[3] In low gain mode, typical gain is 22 dB and typical current is 67 mA.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D