5
your first call for illuminated components www.vcclite.com 1.800.522.5546
03/17 Rev 2
Application Notes
1. Storage
The Storage Temperature and RH are: 5°C ~ 30°C, RH 60% or less.
We suggest our customers use our products within a year.
If the moisture absorbent material (silica gel) has faded away or the LEDs exceeded the storage
time,
bake treat more than 24 hours at 60°C ±5°C.
2. Electrostatic Discharge (ESD)
Static electricity or surge voltage will damage the LEDs.
Recommendations:Use a conductive wrist band or anti-electrostatic glove when handling
these LEDs. All devices, equipment and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded. In the event of a manual working
in process, make sure the devices are well protected from ESD at any time.
3. Recommended Soldering Condition
Temperature at tip of soldering iron: 350°C Max
Soldering time: 3 sec ±1 sec (once only)
Soldering heat 260°C Max.
Soldering heat (DIP)
100°C Max
Preheat
245 5°C Within 5 Sec.
+
_
60 Sec. Max
