KMP_1700C_C02 Page 1 of 2
1700 Series
Radial Lead Inductors
www.murata-ps.com
www.murata-ps.com/support
For full details go to
www.murata-ps.com/rohs
FEATURES
RoHS compliant
Radial format
Up to 1.8A IDC
10μH to 68mH
Low DC resistance
Miniature size
PCB mounting
MIL-I-23053/5 class III sleeving
Fully tinned leads
Supplied in packs of 20
Compatible with RoHS soldering systems
Backward compatible with
Sn/Pb soldering systems
Custom parts available
DESCRIPTION
The 1700 Series is a general purpose range of
inductors suitable for low to medium current
applications. Their small footprint makes them
ideal for high density applications where a chip
inductor will not cope with the power requirement.
SELECTION GUIDE
Order Code
Inductance,
(1kHz, 0.1V
AC)
DC Current
1
DC Resistance Q at f kHz SRF
±10% Max. Max. Nom. Nom.
μH A Ω Q f MHz
17103C 10.0 1.80 0.05 65 1000 21.2
17153C 15.0 1.50 0.06 60 500 19.4
17223C 22.0 1.20 0.08 50 500 17.0
17333C 33.0 1.00 0.13 50 500 11.4
17473C 47.0 0.86 0.20 50 500 10.9
17683C 68.0 0.85 0.26 90 100 8.7
17104C 100.0 0.74 0.35 90 100 7.0
17154C 150.0 0.58 0.49 90 100 5.7
17224C 220.0 0.48 0.75 100 100 4.4
17334C 330.0 0.42 1.10 100 100 3.7
17474C 470.0 0.34 1.50 110 100 3.2
17684C 680.0 0.28 2.40 120 100 2.5
17105C 1.0mH 0.19 3.30 120 100 2.1
17155C 1.5mH 0.15 5.90 130 100 1.9
17225C 2.2mH 0.12 7.80 90 50 1.7
17335C 3.3mH 0.11 10.0 140 150 1.2
17475C 4.7mH 0.09 13.6 150 150 0.95
17685C 6.8mH 0.08 20.0 145 150 0.85
17106C 10.0mH 0.07 34.0 155 150 0.62
17156C 15.0mH 0.06 47.0 140 150 0.51
17226C 22.0mH 0.05 75.0 100 50 0.34
17336C 33.0mH 0.04 108.0 95 50 0.28
17476C 47.0mH 0.03 154.0 90 50 0.25
17686C 68.0mH 0.02 220.0 70 50 0.20
TYPICAL CORE/WIRE CHARACTERISTICS
Inductance Temperature
Coeffi cient
Resistance Temperature
Coeffi cient
Curie Temperature
(T
C
)
Saturation Flux
(B
SAT
)
350ppm 3900ppm 190°C 325mT
ABSOLUTE MAXIMUM RATINGS
Operating free air temperature range
0°C to 70°C
Storage temperature range
-40°C to 125°C
SOLDERING INFORMATION
2
Peak wave solder temperature
300˚C for 10 seconds
Pin fi nish
Hot dipped tin
All specifi cations typical at T
A
=25°C
1 Maximum DC current occurs when either the inductance falls to 90% of its nominal value or when its temperature rise reaches 30°C,
whichever is sooner.
2 For further information, please visit www.murata-ps.com/rohs
