SPST
KDS1102RSWC12CB
Features/Benefits
Typical Applications
Slot mount into chassis to reduce installation cost
Wire harness length & connector easily customized
Available in N.O. or N.C. configuration
Intrusion/Alarm switch in network desktop PC
Intrusion/Alarm switch in telecommunication equipment
Intrusion/Alarm switch in cellular base station
PANEL CUTOUT
(THICKNESS .040 .003)
Intrusion Switches
C&K KDS Series
A-1
www.ittcannon.com
ITT Industries
Cannon
How To Order
Complete part numbers for KDS Series Switches are shown below.
Specifications
CONTACT RATING: 0.4 VA max. @ 20 V AC or DC.
MECHANICAL & ELECTRICAL LIFE: 10,000 actuations min. at full
load.
CONTACT RESISTANCE: 200 milliohms max. initial @ 2-4 V DC,
100mA.
INSULATION RESISTANCE: 10
9
ohms min.
OPERATING TEMPERATURE: –30C to +85C
TRAVEL: Pretravel: 0.050 max. Overtravel: 0.375.025
DIELECTRIC STRENGTH: 500 V RMS min. @ sea level.
PACKAGING: Bulk packaging.
Materials
HOUSING: Nylon 6/6 (UL 94V-0)
ACTUATOR: Nylon 6/6 (UL 94V-0)
MOVABLE CONTACT: Copper alloy, gold plate over nickel plate.
FIXED CONTACT: Brass, gold plate over nickel plate.
WIRE: UL 1061-24 AWG.
CONNECTOR HOUSING: AMP #103688-1 or equivalent.
CONNECTOR TERMINAL: AMP #104480-2 or equivalent.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
SWITCH FUNCTION
POS. 1 POS. 2
PART NUMBER
‘L’
LEAD LENGTH
(IN)
SCHEMATIC
KDS1102RSWC12CB
12
KDS1102RSWC16CB
16.5
OFF MOM.
SPST N.O.
KDS3302RSWC12CB
12
KDS3302RSWC16CB
16.5
ON MOM.
SPST N.C.
