MAX6161–MAX6168
Precision, Micropower, Low-Dropout, High-
Output-Current, SO-8 Voltage References
_______________________________________________________________________________________ 9
ELECTRICAL CHARACTERISTICS—MAX6165 (V
OUT
= 5.000V)
(V
IN
= +5.5V, I
OUT
= 0, T
A
= T
MIN
to T
MAX
, unless otherwise specified. Typical values are at T
A
= +25°C.) (Note 1)
4.998 5.000 5.002
Output Voltage V
OUT
T
A
= +25°C
MAX6165B
4.995 5.000 5.005
V
MAX6165A 2 5
Output Voltage Temperature
Coefficient (Note 2)
TCV
OUT
V
IN
- V
OUT
200
ΔV
OUT
/
180 400
5mA 0.6 0.9
Load Regulation
ΔV
OUT
/
110
OUT Short-Circuit Current I
SC
Short to IN 25
mA
Long-Term Stability
ΔV
OUT
/
Output Voltage Hysteresis
(Note 3)
ΔV
OUT
/
125
DYNAMIC CHARACTERISTICS
f = 0.1Hz to 10Hz 60
Noise Voltage e
OUT
f = 10Hz to 10kHz 60
V
OUT
/V
IN
V
IN
= 5.5V ±100mV, f = 120Hz 65 dB
Turn-On Settling Time t
R
V
OUT
to 0.1% of final value, C
OUT
= 50pF
300
µs
INPUT CHARACTERISTICS
Supply Voltage Range V
IN
Guaranteed by line-regulation test V
OUT
+ 0.2
12.6
V
Quiescent Supply Current I
IN
100 120
µA
Change in Supply Current
ΔI
IN
/ΔV
IN
Note 1: 100% production tested at T
A
= +25°C. Guaranteed by design for T
A
= -40°C to +85°C.
Note 2: Temperature Coefficient is specified by the “box” method; i.e., the maximum ΔV
OUT
is divided by the maximum ΔT.
Note 3: Thermal Hysteresis is defined as the change in T
A
= +25°C output voltage before and after temperature cycling of the
device (from T
A
= T
MIN
to T
MAX
). Initial measurement at T
A
= +25°C is followed by temperature cycling the device to
T
A
= +85°C then to T
A
= -40°C, and another measurement at T
A
= +25°C is compared to the original measurement at
T
A
= +25°C.
Note 4: Dropout voltage is the minimum input voltage at which V
OUT
changes ≤ 0.2% from V
OUT
at V
IN
= 5.0V (V
IN
= 5.5V for
MAX6165).
