461-800-526-2324 • www.us.tdk-lambda.com/lp/ Disclaimer: us.tdk-lambda.com/lp/legal.htm
CPFE1000FI Series
Features
Smaller size than CPFE1000F
Base plate cooled, no fan required
Protective coating option
I
2
C Interface
720-1000W Conduction Cooled Power Supplies
(1) 110/220VAC
(2) 100% loading required.
(3) Warm up period of 30 minutes below -30°C for ripple. Jeita RC-9131C Method, see instruction manual for test methods.
Model
AC Input VAC 90 to 265VAC, 47-63Hz
Input Current (1) A 13.6 / 6.6 (Model dependant)
Inrush Current (110 / 220VAC) A 20 / 40 peak
Power Factor - Meets EN61000-3-2
Effi ciency (typical) (2) % 79 to 86% (Model dependant)
Output Voltage Setpoint Accuracy - ±2% at 50% load
Line Regulation mV 12V: 48mV, 28V: 56mV, 48V: 96mV
Load Regulation mV 12V: 48mV, 28V: 56mV, 48V: 96mV
Ripple and Noise (20MHz BW) (3) - 1% (2% below 0°C)
Over Current Protection % 105 - 140% (Automatic recovery)
Over Voltage Protection - 125 - 145% (Automatic recovery)
Parallel Operation - Yes (Single wire)
Power On Signal (ENA) - Open collector (10mA sink current). Low (on) when output is present
Auxiliary Supply - 10 - 14V, 20mA
Remote On/Off (Opto isolated) - High = On
Temperature Coeffi cient °C <0.02%/°C
Overtemperature °C Shuts down between 90 - 115°C (Auto recovery)
Hold Up Time (230VAC) ms 20ms @ 25°C and warmer
Leakage Current (at 230VAC, 50Hz) uA < 1.5mA
Remote Sense - Yes, compensates up to 500mV cable drop
I²C Interface - Provides manufacturing location, date, serial number, part number, unit revision, output
voltage & current read back, base plate temperature, remote on/off, IOG, DC
good and over temperature warning
Operating Temperature °C -40 to +70°C ambient, (See reverse side for derating) (85°C baseplate, maximum)
Storage Temperature °C -40 to +100°C
Humidity - Operating: 20 - 90%RH, Non operating 10 - 95%RH (Pcb assembly protective coated)
Cooling - Conduction cooled
Withstand Voltage - Input to Output 4242VDC, Input to Ground 2121VDC, Output to ground 500VDC
Vibration (non operating) - MIL-STD-810F, Method 514.5, Proc 1, Category 1, 10
Shock - MIL-STD-810F, Method 516.5, Proc. I, IV, VI
Safety Agency Approvals - UL60950-1, CSA 22.2 No 60950-1, EN60950-1 (Ed 2), CE Mark
Line Dip - Complies with SEMI F47 (200VAC line only)
Conducted & Radiated EMI - Conducted: EN55022/EN55011 Class B, Radiated: Class A
Immunity - IEC61000-4-2 (Contact Level 2, Air discharge Lvl 3), -3 (Lvl 3), -4(Lvl 3), -5 (Lvl 3),
-6 (Lvl 3), -8 (Lvl 3), -11 (Class 3 ), -12 (Lvl 3), -14 (Class 3)
Weight (Typ) g 1240g (without cover)
Size (L x W x H) mm 254 x 112 x 44mm (262mm including AC connector)
Warranty yrs 2 years
Specifi cations
Key Market Segments & Applications