1
FN6230.4
ISL55141, ISL55142, ISL55143
High-Speed 18V CMOS Comparators
ISL55141, ISL55142, ISL55143 integrated circuits are
high-speed, wide input common-mode range comparators.
They provide three-state window comparators in a high
voltage CMOS process (18V). Each comparator has dual
receive thresholds, CV
A
and CV
B
, for establishing
minimum 1-V
IH
and maximum 0-V
IL
voltage levels. These
devices can accept inputs from a number of logic families,
such as TTL, ECL, CMOS, LVCMOS, LVDS and CML. Two
bits of output per comparator provide the test controller with
qualification of a comparator input into three states. The two
output bits work with a separate user supply to establish
V
OH
, V
OL
levels compatibility with the system’s controller
logic levels.
Fast propagation delay (9.5ns typical at ±50mV overdrive)
makes this family compatible with high-speed digital test
systems. The 18V range enables the comparator input to
operate over a wide input range. Two references per input
enable and three state digitalization of input with voltage
swings of up to 13V common mode. The operating
frequency of these devices is typically 65MHz.
High voltage CMOS process makes these devices ideal for
large voltage swing applications, such as special test
voltages levels associated with Flash devices or power
supervision applications and may avoid the need for test bus
isolation relay(s).
Features
• 18V I/O Range
• 65MHz Operation
• 9.5ns Typical Propagation Delay
• Programmable Input Thresholds
• User Defined Comparator OutputLlevels
• Common-Mode Range Includes Negative Rails
• Small Footprints in QFN Packages
• Power-Down Current <10µA
• Pb-Free (RoHS compliant)
Applications
• Burn in ATE
• Low Cost ATE
• Fast Supervisory Power Control
• Instrumentation
FIGURE 1. FUNCTIONAL BLOCK DIAGRAM
CV
AX
CV
BX
V
INPX
Q
AX
V
OH
V
OL
V
CC
V
EE
V
OH
V
OL
V
CC
V
EE
Q
BX
DUAL LEVEL COMPARATOR - RECEIVERS
Note: x denotes 1, 2 or 4 channels for ISL55141, ISL55142 and
ISL55143, respectively
Data Sheet August 13, 2015
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Copyright Intersil Americas LLC 2008, 2011, 2013, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.