https://www.phoenixcontact.com/pi/products/2701508
08/20/2018Page4/6
Distributed I/O device-AXL E PB IOL8 DI4 M12 6M-2701508
Technical data
IO-Link inputs
Type of protection Overload protection
Short-circuit protection for the sensor supply
Digital outputs
Output description IO-Link ports in digital output (DO) mode
Connection method M12 connector, X01 ... X04 have double occupancy
Connection technology 3-wire
Number of outputs max. 8
Nominal output voltage 24 V DC
Maximum output current per channel 150 mA
Maximum output current per device 1.2 A
Nominal load, ohmic 3.6 W (160 Ω, at nominal load)
Nominal load, inductive 3.6 VA (0.8 H, 160 Ω, at nominal load)
Signal delay max. 150 µs (when switched on)
max. 200 µs (when switched off)
Switching rate 1 per second, maximum (at nominal inductive load)
Limitation of the voltage induced on circuit interruption -15 V DC
Output voltage when switched off max. 1 V
Output current when switched off max. 300 µA
Type of protection Overload protection
Short-circuit protection
Behavior with overload Shutdown with automatic restart
Electrical isolation
Test section
24 V supply (communications power and sensor supply, IO-Link ports)/
bus connection 500 V AC 50 Hz 1 min.
24 V supply (communications power and sensor supply, IO-Link ports)/
FE 500 V AC 50 Hz 1 min.
Bus connection / FE 500 V AC 50 Hz 1 min.
24 V supply (actuator supply)/24 V supply (communications power and
sensor supply, IO-Link ports) 500 V AC 50 Hz 1 min.
24 V supply (actuator supply)/bus connection 500 V AC 50 Hz 1 min.
24 V supply (actuator supply)/FE 500 V AC 50 Hz 1 min.
Standards and Regulations
Mechanical tests Vibration resistance in acc. with EN60068-2-6/IEC60068-2-6 5g
Shock in acc. with EN60068-2-27/IEC60068-2-27 30g, 11 ms period,
half-sine shock pulse
Continuous shock according to EN60068-2-27/IEC60068-2-27 10g
Protection class III, IEC 61140, EN 61140, VDE 0140-1
Environmental Product Compliance
China RoHS Environmentally Friendly Use Period = 25;
