CUSTOMER DRAWING
REV:
A
DATE:
May 20, 2008
© 2008 Tyco Electronics Corporation. All rights reserved.
Raychem Harnessing
300 Constitution Drive
Menlo Park, CA 94025 U.S.A.
TITLE:
HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTOR O/NO C 13
PLAIN CLAMPING NUT
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DOCUMENT NO.
HXS122-KC-90-13-A3-1
DRAWN:
IRT
DATE:
May 20, 2008
CAGE CODE:
06090
DCR #
ECO-08-012470
FILE:
HXS122-KC-90-13-A3-1
SCALE:
NONE
SHEET:
2 OF 3
If this document is printed it becomes uncontrolled. Check for the latest revision.
KIT DESCRIPTION
ITEM DESCRIPTION MATERIAL
1 BODY ASSEMBLY STAINLESS STEEL
2 CLAMPING NUT - PLAIN STAINLESS STEEL
3 CONIC RING STAINLESS STEEL
4 STAR - PLAIN STAINLESS STEEL
TABLE OF DIMENSIONS
Order
Number
Shell Size Ferrule Quantity
Mil. Com. Standard
13 C 13 3
PART NUMBERING
APPLICATION
- ThIs adaptor is designed to be mounted on the following connectors:
MIL-DTL-38999 Series III and IV Shell Sizes C (13)
- It is qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular
connectors only.
- It is designed primarily for open wire bundle installation but is also designed to accept a Raychem heat shrink
moulded part where strain relief is required – see illustration.
