EPOXY DISC Unique
30 x 1 mm + hole 3.2 mm
SOKYMAT reserves the right to change any information or data in this document without prior notice. The distribution and the update of this
document is not controlled. SOKYMAT declines all responsibility for the use of products with any other specifications but the ones mentioned
above. Any additional requirement for a specific customer application has to be validated by the customer himself at his own responsibility. Where
application information is given, it is only advisory and does not form part of the specification.
CLF 3.3.3.7 - V2 - 28.01.2005 - Released - DefKey : 12008
Data Sheet
Chip type:
UNIQUE – read only 64bits
* Test conditions and remarks
Diameter: 30 mm ± 0.5 mm
Thickness: 1.0 mm ± 0.3 mm
Centre hole:: 3.2 mm
Material: Laminated epoxy with glass fiber
Color: Black
Physical:
Operating frequency: 125 kHz ± 6 kHz
*At room temperature
Electrical:
Water (IP66),
Good stability for mineral oil, ethanol, petrol, fuel, etc
Refer to the application note “Epoxy chemical stability”
Chemical:
Thermal:
Storage: -40
o
C to +85
o
C
* 1x 1000h
Peak: +140
o
C
* 1x 24h
Shock/fatigue: -40
o
C to +100
o
C
* 50x 5min with transposition in 20s
Operating: -40
o
C to +85
o
C
Part number:
601143
