OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

730P473X9400

P1-P3P4-P6
Type 730P, Metallized Polypropylene Film Capacitors
High Frequency, Wrap and Fill
The 730P series is designed and manufactured for use in many
demanding power applications. They are non-inductively wound
using the most reliable metallized polypropylene lm available.
A wide range of capacitance values, voltage ratings, lead
terminations and sizes oer the designer an array of options to
best meet the form, t and function requirements specied.
Highlights
- Excellent AC performance
- Low power dissipation
- Low dielectric absorption
- Close tolerance
- High stability
- Compliant to RoHS directive 2002/95/EC
Specications
Capacitance Range 0.022 to 10.0 µF
Capacitance Tolerance ±20% , ±10%, ±5%
Rated Voltage 100 to 630 Vdc (70 V
RMS
to 275 V
RMS ,
60 to 400 Hz)
Operating Temperature Range –55 ºC to 85 ºC
Voltage Derating At +105 ºC, 50%of +85 ºC rating
ESR 20 kHz to 100 kHz
Dissipation Factor 0.1% maximum - Measure all units at 1000 Hz, at +25 ºC
Insulation Resistance Measured at 100 WVDC after a 2 min charge:
At +25 ºC: 200 000 MΩ/µF or 400 000 MΩ minimum
At +85 ºC: 10 000 MΩ/µF or 20 000 MΩ minimum
At +105 ºC: 1000 MΩ/µF or 2000 MΩ minimum
DC Voltage Test 200% of rated voltage for 2 minutes
AC Voltage Test 130% of rated RMS voltage at 60 Hz for 15 seconds
Vibration Test (Condition B) No mechanical damage, short, open or intermittent circuits
DC Life Test 150% of rated voltage for 1000 h at +85 ºC.
No open or short circuits. No visible damage.
Maximum Δ CAP ±1.0%
Minimum IR = 50% of initial limit
Maximum DF = 0.12%
Humidity Test 95% relative humidity at +40 ºC for 250 h.
No visible damage.
Maximum Δ CAP ±1.0%
Minimum IR = 20% of initial limit
Maximum DF = 0.12%
AC Life Test 110% of rated RMS voltage at 60 Hz for 1000 h at +85 ºC
Maximum Δ CAP ±5%
Minimum IR = 50% of initial limit
Maximum DF = 0.12%
Physical Characteristics Lead Pull: 5 lb (2.3 g) for one min. No physical damage.
Lead Bend: After three complete consecutive bend. No damage.
RoHS Compliant
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
Dimensions
Ratings
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
730P 106 X 5 2 XXX
CDE Type
Number
Capacitance in µF
10 µF
Tolerance
5 = ±5%
9 = ±10%
Voltage
1 = 100 Vdc
2 = 250 Vdc
4 = 400 Vdc
6 = 630 Vdc
Special
Construction
Part Numbering System
Type 730P, Metallized Polypropylene Film Capacitors
High Frequency, Wrap and Fill
ESR
(mΩ)
20 Khz
to
100 Khz
Maximum Ripple Current
(Arms ) at 20 Khz
Case Temperature
(2)
atCase Size
CAPACITANCE Catalog Part D L
+25°C +35°C +45°C +55°C +65°C +75°C +85°C(μF) Number Inches [MM] Inches [MM]
100VDC
0.22 730P224X9100 0.275 [7.0] 0.75 [19.0] - 2.3 2.3 2.3 2.3 2.3 1.8 1.0
0.27 730P274X9100 0.298 [7.6] 0.75 [19.0] - 2.6 2.6 2.6 2.6 2.4 1.9 1.1
0.33 730P334X9100 0.324 [8.2] 0.75 [19.0] - 2.8 2.8 2.8 2.8 2.6 2.2 1.2
0.39 730P394X9100 0.347 [8.8] 0.75 [19.0] - 3.1 3.1 3.1 3.1 2.9 2.3 1.3
0.47 730P474X9100 0.376 [9.6] 0.75 [19.0] 37 3.7 3.4 3.1 2.8 2.5 2.0 1.4
0.56 730P564X9100 0.321 [8.2] 1.00 [25.4] 35 3.9 3.6 3.3 2.9 2.6 2.1 1.5
0.68 730P684X9100 0.348 [8.8] 1.00 [25.4] 33 4.1 3.8 3.5 3.1 2.8 2.2 1.6
0.82 730P824X9100 0.377 [9.6] 1.00 [25.4] 31 4.3 4.0 3.6 3.2 2.9 2.3 1.7
1.0 730P105X9100 0.421 [10.7] 1.00 [25.4] 26 5.5 5.1 4.7 4.2 3.6 2.8 2.6
1.2 730P125X9100 0.454 [11.5] 1.00 [25.4] 24 5.7 5.3 4.9 4.4 3.8 3.0 2.8
1.5 730P155X9100 0.500 [12.7] 1.00 [25.4] 20 6.1 5.5 5.1 4.6 4.0 3.2 3.1
1.8 730P185X9100 0.541 [13.7] 1.00 [25.4] 19 6.3 5.7 5.3 4.8 4.1 3.4 3.0
2.0 730P205X9100 0.486 [12.3] 1.25 [31.8] 18 6.5 6.0 5.5 4.9 4.2 3.5 3.2
2.2 730P225X9100 0.507 [12.9] 1.25 [31.8] 18 6.8 6.3 5.7 5.1 4.4 3.6 3.3
2.7 730P275X9100 0.554 [14.1] 1.25 [31.8] 17 7.1 6.5 6.0 5.3 4.6 3.7 3.4
3.0 730P305X9100 0.581 [14.8] 1.25 [31.8] 16 7.3 6.7 6.2 5.5 4.8 3.9 3.5
3.3 730P335X9100 0.606 [15.4] 1.25 [31.8] 16 7.4 6.8 6.4 5.6 4.9 4.0 3.6
3.9 730P395X9100 0.654 [16.6] 1.25 [31.8] 15 7.6 6.9 6.6 5.8 5.1 4.1 3.7
4.0 730P405X9100 0.537 [13.6] 1.75 [44.5] 15 7.8 7.0 6.7 5.9 5.2 4.2 3.8
4.7 730P475X9100 0.577 [14.7] 1.75 [44.5] 15 8.1 7.4 6.8 6.0 5.3 4.3 3.9
5.0 730P505X9100 0.593 [15.1] 1.75 [44.5] 14 8.3 7.6 7.0 6.2 5.4 4.4 4.0
5.6 730P565X9100 0.624 [15.8] 1.75 [44.5] 14 8.4 7.7 7.1 6.4 5.5 4.5 4.1
6.0 730P605X9100 0.644 [16.4] 1.75 [44.5] 14 8.5 7.8 7.2 6.5 5.6 4.6 4.2
6.8 730P685X9100 0.682 [17.3] 1.75 [44.5] 13 8.5 8.0 7.4 6.7 5.7 4.7 4.3
8.0 730P805X9100 0.735 [18.7] 1.75 [44.5] 13 8.6 8.3 7.7 6.8 6.0 4.8 4.4
8.2 730P825X9100 0.743 [18.9] 1.75 [44.5] 13 8.8 8.6 8.0 7.0 6.1 4.9 4.5
10.0 730P106X9100 0.815 [20.7] 1.75 [44.5] 12 9.0 9.0 8.5 7.6 6.6 5.4 4.9
Notes
Other capacitance values and voltage ratings are available upon request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To speciy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/μF. The maximum rate voltage change is 10 V/μs.
ESR
(mΩ)
20 Khz
to
100 Khz
Maximum Ripple Current
(Arms ) at 20 Khz
Case Temperature
(2)
atCase Size
CAPACITANCE Catalog Part D L
+25°C +35°C +45°C +55°C +65°C +75°C +85°C(μF) Number Inches [MM] Inches [MM]
250VDC
0.1 730P104X9250 0.279 [7.1] 0.75 [19.0] - 1.5 1.5 1.5 1.5 1.5 1.5 0.9
0.12 730P124X9250 0.300 [7.6] 0.75 [19.0] - 1.9 1.9 1.9 1.9 1.9 1.7 1.1
0.15 730P154X9250 0.327 [8.3] 0.75 [19.0] - 2.3 2.3 2.3 2.3 2.3 1.9 1.1
0.18 730P184X9250 0.353 [9.0] 0.75 [19.0] - 2.7 2.7 2.7 2.7 2.5 2.0 1.2
0.22 730P224X9250 0.306 [7.8] 1.00 [25.4] - 1.9 1.9 1.9 1.9 1.9 1.9 1.3
0.27 730P274X9250 0.333 [8.5] 1.00 [25.4] - 2.4 2.4 2.4 2.4 2.4 2.2 1.4
0.33 730P334X9250 0.362 [9.2] 1.00 [25.4] - 2.9 2.9 2.9 2.9 2.9 2.3 1.5
0.39 730P394X9250 0.389 [9.9] 1.00 [25.4] - 3.4 3.4 3.4 3.2 2.9 2.3 1.6
0.47 730P474X9250 0.422 [10.7] 1.00 [25.4] 35 3.8 3.7 3.6 3.4 2.9 2.4 1.7
0.56 730P564X9250 0.464 [11.8] 1.00 [25.4] 33 3.9 3.8 3.7 3.5 3.1 2.5 1.8
0.68 730P684X9250 0.425 [10.8] 1.25 [31.8] 32 4.0 3.9 3.8 3.7 3.2 2.6 1.9
0.82 730P824X9250 0.471 [12.0] 1.25 [31.8] 31 4.2 4.1 4.0 3.9 3.4 2.8 2.0
1.0 730P105X9250 0.513 [13.0] 1.25 [31.8] 28 4.4 4.4 4.4 4.4 4.3 3.5 3.2
1.2 730P125X9250 0.554 [14.1] 1.25 [31.8] 27 4.7 4.6 4.5 5.0 4.5 3.7 3.3
1.5 730P155X9250 0.613 [15.6] 1.25 [31.8] 26 5.1 5.0 4.9 5.4 4.7 3.9 3.5
1.8 730P185X9250 0.667 [17.0] 1.25 [31.8] 25 5.9 5.8 5.7 5.7 5.0 4.1 3.7
2.0 730P205X9250 0.700 [17.8] 1.25 [31.8] 21 7.2 7.2 6.8 6.0 5.2 4.3 3.9
2.2 730P225X9250 0.610 [15.5] 1.75 [44.5] 20 8.4 7.5 7.0 6.3 5.4 4.5 4.1
2.7 730P275X9250 0.669 [17.0] 1.75 [44.5] 19 8.6 7.8 7.3 6.6 5.7 4.7 4.3
3.0 730P305X9250 0.703 [17.9] 1.75 [44.5] 18 9.0 8.3 7.6 6.8 5.9 4.8 4.4
3.3 730P335X9250 0.734 [18.6] 1.75 [44.5] 18 9.0 8.4 7.8 7.0 6.0 4.9 4.5
3.9 730P395X9250 0.794 [20.2] 1.75 [44.5] 17 9.0 8.5 8.0 7.2 6.2 5.0 4.6
4.0 730P405X9250 0.803 [20.4] 1.75 [44.5] 16 9.0 8.6 8.2 7.4 6.3 5.1 4.7
4.7 730P475X9250 0.866 [22.0] 1.75 [44.5] 16 9.0 8.8 8.5 7.7 6.6 5.3 4.9
5.0 730P505X9250 0.892 [22.7] 1.75 [44.5] 15 9.0 9.0 8.8 7.9 6.8 5.6 5.1
5.6 730P565X9250 0.941 [23.9] 1.75 [44.5] 15 9.0 9.0 8.9 8.0 7.0 5.8 5.3
6.0 730P605X9250 0.972 [24.7] 1.75 [44.5] 15 9.0 9.0 9.0 8.2 7.2 5.9 5.5
6.8 730P685X9250 0.882 [22.4] 2.25 [57.2] 15 9.0 9.0 9.0 8.4 7.4 6.0 5.6
8.0 730P805X9250 0.953 [24.2] 2.25 [57.2] 14 9.0 9.0 9.0 8.7 7.8 6.3 5.8
8.2 730P825X9250 0.964 [24.5] 2.25 [57.2] 14 9.0 9.0 9.0 8.8 7.9 6.4 5.9
10.0 730P106X9250 1.060 [26.9] 2.25 [57.2] 13 9.0 9.0 9.0 8.9 8.3 6.8 6.2
400VDC
0.047 730P473X9400 0.258 [6.6] 0.75 [19.0] - 1.0 1.0 1.0 1.0 1.0 1.0 0.9
0.056 730P563X9400 0.275 [7.0] 0.75 [19.0] - 1.1 1.1 1.1 1.1 1.1 1.1 0.9
0.068 730P683X9400 0.297 [7.5] 0.75 [19.0] - 1.4 1.4 1.4 1.4 1.4 1.4 1.0
Notes
Other capacitance values and voltage ratings are available upon request
(1) Part Numbers listed are for a capacitance tolerance of ± 10 %. To speciy ± 20 % tolerance, change the “X9” in the Part Number to “X0”;
for ± 5 %, from “X9” to “X5”.
(2) The peak current pulse capability ot these capacitors is 10 A/μF. The maximum rate voltage change is 10 V/μs.
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830
730P 106 X 5 2 XXX
CDE Type
Number
Capacitance in µF
10 µF
Tolerance
5 = ±5%
9 = ±10%
Voltage
1 = 100 Vdc
2 = 250 Vdc
4 = 400 Vdc
6 = 630 Vdc
Special
Construction
Type 730P, Metallized Polypropylene Film Capacitors
High Frequency, Wrap and Fill
P1-P3P4-P6

730P473X9400

Mfr. #:
Buy 730P473X9400
Manufacturer:
Description:
Film Capacitors .047uF 400volts 10%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet