TLP548J
2 2017-07-10
Absolute Maximum Ratings
(Ta = 25°C)
Characteristic Symbol Rating Unit
LED
Forward current I
F
50 mA
Forward current derating (Ta ≥ 53°C) ΔI
F
/ °C -0.7 mA / °C
Peak forward current (100 μs pulse, 100 pps) I
FP
1 A
Reverse voltage V
R
5 V
Diode power dissipation
P
D
100 mW
Diode power dissipation derating (Ta ≥ 53°C)
ΔP
D
/°C -1.4 mW/°C
Detector
Peak forward voltage (R
GK
= 27kΩ) V
DRM
600 V
Peak reverse voltage (R
GK
= 27kΩ) V
RRM
600 V
On-state current I
T (RMS)
150 mA
On-state current derating (Ta ≥ 25°C) ΔI
T
/ °C -2.0 mA / °C
Peak on-state current (100 μs pulse, 120 pps) I
TP
3 A
Peak one cycle surge current I
TSM
2 A
Peak reverse gate voltage V
GM
5 V
Output power dissipation P
O
150 mW
Output power dissipation derating (Ta ≥ 25°C) ΔP
O
/ °C
-1.5 mW / °C
Operating temperature range T
opr
-40 to 100 °C
Storage temperature range T
stg
-55 to 125 °C
Lead soldering temperature (10 s) T
sol
260 °C
Isolation voltage (AC, 60 s, R.H. ≤ 60%) (Note 1) BV
S
2500 V
rms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability
Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e.
reliability test report and estimated failure rate, etc).
Note 1: Device Considered a two terminal device: pins 1, 2 and 3 shorted together and pins 4, 5 and 6 shorted together.
Recommended Operating Conditions
Characteristic Symbol Min Typ. Max Unit
Supply voltage V
AC
― ― 240 V
ac
Forward current I
F
10 ― 25 mA
Operating temperature T
opr
-25 ― 85 °C
Gate to cathode resistance R
GK
― 27 33 kΩ
Gate to cathode capacity C
GK
― 0.01 0.1 μF
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
