Simple, Long-Range Wireless Ethernet Bridging
Laird’s RAMP Bridge provides a simple, high-performance Wireless
Ethernet cable replacement system that eliminates the frustration, cost,
and complication of its competitors, all contained in a small, durable
form factor. Say goodbye to enormous outdoor antennas that rely on
directional precision and complicated alignment. Laird’s RAMP Bridge
makes it easier than ever to achieve industrial-strength long-range
Ethernet cable replacement in any environment.
QUICK AND EASY,
RIGHT OUT OF THE BOX
RAMP Bridge starter packs contain two
RAMP Bridge units configured as server and
client. This allows you to plug into your
network and get started quickly. Individual
units are also for sale which may be set as
either a server or a client with the on-board
setup wizard. The RAMP Bridge setup
wizard, accessible over your web browser,
makes setting up, testing, backing up, and
updating every RAMP Bridge device as
simple as following a few prompts.
SMALL, RUGGED, AND
ENTIRELY WEATHERPROOF
In addition to the high-gain
omnidirectional antenna, the RAMP
Bridge is encased in a sturdy IP67
waterproof enclosure. This allows the
RAMP Bridge to be reliably deployed
without the cost or complications of
external, directional antennas. The
integrated antenna is complemented
by an internal power amplifier to
deliver range usually only available with
an external antenna.
ALL THE PERFORMANCE,
NONE OF THE HASSLE
The RAMP Bridge provides exceptional
performance, connectivity, and range in an
impressively small form factor. It achieves RF data
rates up to 54Mbps at ranges as high as half a
mile, and a maximum range of 3.5 miles. Don’t
struggle with products that rely on huge
directional antennas which must be carefully
aligned and maintained to connect. The RAMP
Bridge’s omnidirectional antenna means you’ll
never have to carefully point antennas to achieve
superior communications. This makes the RAMP
Bridge the best and simplest solution for wireless
deployment in all environments.
Features & Benefits
Point to point or point to multipoint bridging (up to
five clients)
Omni-directional internal antenna (no pointing
necessary)
RF Data rates up to 54Mbps
Browser-based configuration wizard, no need for
external configuration software or drivers
Power Over Ethernet (802.3af)
IP67-certified waterproof enclosure
FCC/IC Regulatory approvals
Digital signage
(LED signs, reader
boards, outdoor
menus)
Remote POS
terminals for
hospitality / retail
Easy, robust
networking in
remote worksite
locations
USA: +1.800.492.2320
Europe: +44.1628.858.940
Asia: +852.2923.0610
wirelessinfo@lairdtech.com
www.lairdtech.com/RAMP
The details contained within this document are subject to change. Download the
product specification from www.lairdtech.com/RAMP for the most current
specification.
