Isolator Series 120V 250W UL 60601-1 Medical-
Grade Isolation Transformer with 2 Hospital-
Grade Outlets
MODEL NUMBER: IS250HG
Description
Isolator Series UL 60601-1 Listed Medical-Grade Isolation Transformers offer line isolation and
continuous noise filtering. An internal low-impedance isolation transformer component offers 100%
isolation from the input AC line. Full UL 60601-1 medical-grade listing with hospital-grade plug and outlet
receptacles makes Isolator medical-grade transformers ideal for protecting sensitive electronic equipment
in patient-care areas. Faraday shield reduces the cumulative leakage current of the Isolator and
connected equipment to levels less than 100 microamps. Removes EMI/RFI noise, utility switching
transients and harmonics generated by other on-site loads. Reduces impact of utility- or lightning-related
surge conditions. Transformer filtering provides continuous common-mode noise rejection with no
wearable parts. Reduces 6000V IEEE587 Category A & B ring wave and combination wave test surges to
only 0.5V common mode. Includes two NEMA 5-15R hospital-grade output receptacles, 10-foot power
cord, hospital-grade input plug, circuit breaker overload protection, lighted power switch and rugged all-
metal unit housing. Ships ready for placement in any industrial, medical, office or network environment.
PLUG/OUTLETS: Input - NEMA 5-15P Hospital Grade; Output - 2 NEMA 5-15R Hospital Grade
ELECTRICAL: 120V AC, 60 Hz, 2.2A (requires NEMA 5-15R wall receptacle).
Features
Offers line isolation and continuous noise filtering
●
Internal low-impedance isolation transformer with Faraday shield offers 100% isolation from the input
AC line
●
Full UL 60601-1 medical-grade listing with hospital-grade plug and outlet receptacles for the protection
of sensitive electronic equipment in patient-care areas
●
Reduces cumulative leakage current of the Isolator and connected equipment to levels less than 100 A
●
Floating AC output prevents noise coupling from noisy hospital ground circuits
●
Inexpensive alternative to dedicated circuits and site electrical upgrades
●
Removes EMI/RFI noise, utility switching transients, load-generated harmonics and ground loops
●
Transformer filtering offers continuous common-mode noise rejection with no wearable parts
●
Reduces 6000V IEEE587 Cat A & B ring wave and combination wave test surges to only 0.5V common
●
Highlights
Complete line isolation & noise
filtering
●
250 watts, 2 outlets, 10 ft. power
cord
●
Hospital-grade plug and
receptacles
●
Lowers cumulative leakage
current of connected equipment
to under 100 A
●
TAA-compliant
●
Package Includes
IS250HG Isolation Transformer
●
Instruction manual with warranty
information
●
1 / 3