TA58L05,06,08,09,10,12,15S
2013-11-01
2
Marking
Note 1: A line under a Lot No. identifies the indication of product Labels.
Not underlined: `Pb`/INCLUDES > MCV
Underlined: `G`/RoHS COMPATIBLE or `G`/RoHS `Pb`
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product. The RoHS is the Directive 2011/65/EU of the European Parliament and of the Council of 8
June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Note 2: The “**” in each product name is replaced with the output voltage of each product.
The product(s) in this document (“Product”) contain functions intended to protect the Product from
temporary small overloads such as minor short-term overcurrent, overvoltage, or overheating. The
protective functions do not necessarily protect Product under all circumstances. When incorporating
Product into your system, please design the system (1) to avoid such overloads upon the Product, and
(2) to shut down or otherwise relieve the Product of such overload conditions immediately upon
occurrence. For details, please refer to the notes appearing below in this document and other
documents referenced in this document.
Pin Description
Pin No. Symbol Description
1 IN Input terminal. Connected by capacitor (C
IN
) to GND.
3 GND Ground terminal
2 OUT Output terminal. Connected by capacitor (C
OUT
) to GND.
How to Order
Product No. Package Package Type and Capacity
TA58L**S(Q) (Note 3) TO-220NIS Loose in bag: 50 (1 bag)
Note 3: The “**” in each product number is replaced with the output voltage of each product.
Block Diagram
Over current
protection
Over voltage/
thermal shutdown
1
2
3
－
+
IN
OUT
GND
Lot No.
Note 1
58L**S
Part No. (or abbreviation code)
