3
IDT74FCT163374A/C
3.3V CMOS 16-BIT REGISTER (3-STATE)
INDUSTRIAL TEMPERATURE RANGE
Symbol Parameter Test Conditions
(1)
Min. Typ.
(2)
Max. Unit
VIH Input HIGH Level (Input pins) Guaranteed Logic HIGH Level 2 — 5.5 V
Input HIGH Level (I/O pins) 2 — VCC+0.5
VIL Input LOW Level (Input and I/O pins) Guaranteed Logic LOW Level –0.5 — 0.8 V
IIH Input HIGH Current (Input pins) VCC = Max. VI = 5.5V — — ±1
Input HIGH Current (I/O pins) V
I = VCC ——±1µA
I
IL Input LOW Current (Input pins) VI = GND — — ±1
Input LOW Current (I/O pins) VI = GND — — ±1
IOZH High Impedance Output Current VCC = Max. VO = VCC ——±1µA
IOZL (3-State Output pins) VO = GND — — ±1
VIK Clamp Diode Voltage VCC = Min., IIN = –18mA — –0.7 –1.2 V
IODH Output HIGH Current VCC = 3.3V, VIN = VIH or VIL, VO = 1.5V
(3)
–36 –60 –110 mA
IODL Output LOW Current VCC = 3.3V, VIN = VIH or VIL, VO = 1.5V
(3)
50 90 200 mA
V
OH Output HIGH Voltage VCC = Min. IOH = –0.1mA VCC-0.2 — —
V
IN = VIH or VIL IOH = –3mA 2.4 3 — V
VCC = 3V IOH = –8mA 2.4
(5)
3—
VIN = VIH or VIL
VOL Output LOW Voltage VCC = Min. IOL = 0.1mA — — 0.2
VIN = VIH or VIL IOL = 16mA — 0.2 0.4
I
OL = 24mA — 0.3 0.55 V
VCC = 3V IOL = 24mA — 0.3 0.5
VIN = VIH or VIL
IOS Short Circuit Current
(4)
VCC = Max., VO = GND
(3)
–60 –135 –240 mA
VH Input Hysteresis — — 150 — mV
I
CCL Quiescent Power Supply Current VCC = Max. — 0.1 10 µ A
ICCH VIN = GND or VCC
ICCZ
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Industrial: TA = –40°C to +85°C, VCC = 2.7V to 3.6V
NOTES:
1. For conditions shown as Min. or Max., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3V, +25°C ambient.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. This parameter is guaranteed but not tested.
5. VOH = VCC–0.6V at rated current.