D
STANDARD CONSTRUCTION D3G - GLASS EPOXY CONSTRUCTION
SPECIFICATIONS
ELECTRICAL
Current and Voltage Rating: Make and break resistive load
1.5 amps @ 28 VDC; 0.5 amp @ 115 VAC.
Current Carrying Capacity: 9 amps.
Dielectric Strength: 1,000 VAC between current carrying parts and
ground.
Contact Resistance: Average initial 3.5 milliohms.
Insulation Resistance: Glass in excess of 750,000 megohms.
Ceramic in excess of 1,000,000 megohms.
Diallyl in excess of 900,000 megohms.
Hardware: Mounting nut and lockwasher are shipped assembled.
EPOXY GLASS INSULATION - BRASS SILVER PLATE
SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - ADJUSTABLE STOPS SET @ 2 POS.
CERAMIC INSULATION - SILVER ALLOY - 2.6 AMPS @ 28 VDC
SWITCHES - SOLDER LUG TERMINALS - 30° INDEX - ADJUSTABLE STOPS SET @ 2 POS.
SPECIFICATIONS AND ORDERING INFORMATION
D3 - SERIES
1 5/16" DIAMETER 1.5 AMPS @ 28 VDC
MECHANICAL
Materials and Finishes: All parts utilize non-corrosive materials.
Clips and Rotors: Silver alloy standard on ceramic.
Brass with silver plate standard on glass.
Insulation: Glass epoxy, ceramic, or diallyl phthalate.
Index: Single-ball, hill and valley.
Index Life: 25,000 cycles minimum.
Index Torque: Switches have lowest practical torque consistent
with crisp detenting and smooth, reliable operation.
Index Angles: Positive 30° standard, 60° available.
Index Stops: Adjustable standard, fixed or continuous.
Stop Strength: 25 in. lbs. minimum.
STANDARD
PART
NUMBER
DIMENSIONS
* FIGURES ARE SHOWN ON PAGES 55 AND 56.
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING
*
ACTIVE POLES/ NO. OF SHORTING NON- FIG.
POLES POSITIONS SECTION SECTIONS SHORTING
*
22
UNIT OF ELECTRO SWITCH CORP.
• ELECTRONIC PRODUCTS
2010 Yonkers Road
Raleigh, NC 27604
Telephone: (888) ROTARYS or (919) 833-0707
Fax: (800) 909-9171 or (919) 833-8016
The D3 Series was originally designed as a high quality military switch, but is
ideal for use in both military and commercial equipment applications. The
standard features of this hill and valley design are glass epoxy insulation and
a 30° index, with options of ceramic and diallyl insulation and a 60° index.
01 02-11 1 1 D3G0111S D3G0111N DA 01 02-11 1 1 D3C0111S D3C0111N DA
02 02-11 1 2 D3G0211S D3G0211N DA 02 02-11 1 2 D3C0211S D3C0211N DA
02 02-05 2 1 D3G0205S D3G0205N DH 02 02-05 2 1 D3C0205S D3C0205N DH
03 02-11 1 3 D3G0311S D3G0311N DA 03 02-11 1 3 D3C0311S D3C0311N DA
03 02-03 3 1 D3G0303S D3G0303N DM 03 02-03 3 1 D3C0303S D3C0303N DM
04 02-05 2 2 D3G0405S D3G0405N DH 04 02-05 2 2 D3C0405S D3C0405N DH
06 02-03 3 2 D3G0603S D3G0603N DM 06 02-03 3 2 D3C0603S D3C0603N DM
06 02-05 2 3 D3G0605S D3G0605N DH 06 02-05 2 3 D3C0605S D3C0605N DH
