Technical Data Sheet
Cable assembly
RPC-2.92 Plug / RPC-2.92 Jack – RTK 106
LU1-033-XXX
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Email : info@rosenberger.de
Page
1 / 1
Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
RF_35/09.14/6.2
All dimensions are in mm; tolerances: ± 3mm for A ≤ 300 mm; ± 1% for A > 300 mm
Available variants
max. Insertion loss at 40 GHz
LU1-033-XXX
≤ 0.00285 dB/mm * A mm + 0.6 dB
ROSENBERGER YYYY-WW
LU1-033-XXX
0.0361 g/mm * A mm + 27 g
XXX – length in mm = A Standard lengths are 500 / 1000 /1500 /2000mm
WW – week YYYY – year ssss – serial no. FAC – Factory Code RRRRRRR – lot nr.
Note: max. Insertion Loss:
First constant = Cable attenuation in dB /mm; Second Constant = Connector left and Connector right +needed Adaptor
Weight:
First constant = Cable- and Armour- weight per mm; Second Constant = Connector left and Connector right weight per pce
Assembly parts
Connector left RPC-2.92 plug 02S121-2U1S3
Connector right RPC-2.92 jack 02K121-2U1S3
Cable RTK 106
Electrical data
Impedance 50 Ω
Frequency DC to 40 GHz
Return loss
1
≥ 17 dB, DC to 40 GHz
Insertion loss
1
see table available variants
Individual testing and documentation:
Measurement plot with all 4 S-Parameters (S11; S22; S21; S12) is included with the cable assembly and on
the backside the care and handling instruction is printed. Measurement adaptors used are mentioned in the
commentary field.
1
Return Loss and Insertion Loss includes the measurement adaptor
Mechanical data
Minimum bend radius:
Single 6.35 mm
Multiple 38.4 mm
Environmental data
Temperature range -40°C to +85°C
RoHS compliant
Draft Date Approved Date Rev. Engineering change number Name Date
Martin Moder 02/07/15 Herbert Babinger 07/07/15 m00 15-s277 Kathrina Mitterer 07/07/15
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr
our part and no
statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
