MP3302 –40V, 1.3A, SINGLE-CELL STEP-UP WHITE LED DRIVER WITH SINGLE WIRE DIMMING CONTROL
MP3302 Rev. 0.98 www.MonolithicPower.com 2
5/5/2010 MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2010 MPS. All Rights Reserved.
ORDERING INFORMATION
Part Number Package Top Marking Free Air Temperature (T
A
)
MP3302DJ* TSOT23-5 N6
–40°C to +85°C
MP3302DD** QFN8 (2mm x 3mm) N7
–40°C to +85°C
* For Tape & Reel, add suffix –Z (e.g. MP3302DJ–Z);
For RoHS Compliant Packaging, add suffix –LF (e.g. MP3302DJ–LF–Z).
** For Tape & Reel, add suffix –Z (e.g. MP3302DD–Z);
For RoHS Compliant Packaging, add suffix –LF (e.g. MP3302DD–LF–Z)
PACKAGE REFERENCE
TOP VIEW
GND
IN
NC
EN
1
2
3
4
SW
NC
FB
GND
8
7
6
5
Exposed Pad
Connect to GND
TSOT23-5 QFN8 (2mm x 3mm)
ABSOLUTE MAXIMUM RATINGS
(1)
SW Pin.........................................–0.5V to +44V
All Other Pins..............................–0.3V to +6.5V
Continuous Power Dissipation…(T
A
= +25°C)
(2)
TSOT23-5 ................................................ 0.57W
QFN8 (2mm x 3mm) ................................ 1.56W
Storage Temperature.............. –55°C to +150°C
Recommended Operating Conditions
(3)
IN Supply Voltage ..............................2.5V to 6V
SW Pin................................................V
IN
to 36V
Operating Junction Temp. (T
J
)..... –40°C to +125°C
Thermal Resistance
(4)
θ
JA
θ
JC
TSOT23-5.............................. 220 .... 110.. °C/W
QFN8 (2mm x 3mm)............... 80 ...... 16... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature T
J
(MAX), the junction-to-
ambient thermal resistance
JA
, and the ambient temperature
T
A
. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by P
D
(MAX) = (T
J
(MAX)-T
A
)/
JA
. Exceeding the maximum allowable powe
dissipation will cause excessive die temperature, and the
regulator will go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on approximately 1” square of 1 oz copper.
SW
GND
FB
1
2
3
5
4
IN
EN
TOP VIEW
