MAX1793EUE33/V+T

General Description
The MAX1793 low-dropout linear regulator (LDO) oper-
ates from +2.5V to +5.5V and delivers a guaranteed 1A
load current with a low 210mV dropout. The high-accu-
racy (±1%) output voltage is preset at an internally
trimmed voltage (see the
Ordering Information
) or can
be adjusted from 1.25V to 5.0V with an external resis-
tor-divider.
An internal pMOS pass transistor allows a low 125µA
supply current, making the MAX1793 ideal for battery-
operated portable equipment. Other features include a
built-in reset output, low-power shutdown, and short-cir-
cuit and thermal-overload protection. The MAX1793 is
available in a 1.5W, 16-pin power TSSOP package,
which is 30% smaller than a SOT223 package and only
1.1mm high.
________________________Applications
Notebook Computers
Cordless Telephones
Cellular Phones
Modems
Handheld Instruments
PDAs and Palmtop Computers
Features
o Guaranteed 1A Output Current
o Low 210mV Dropout at 1A
o Up to ±1% Output Voltage Accuracy
Preset at 1.5V, 1.8V, 2.0V, 2.5V, 3.3V or 5.0V
Adjustable from 1.25V to 5.0V
o Reset Output (4ms Delay)
o Low 125µA Ground Current
o 0.1µA Shutdown
o Low 115µV
RMS
Output Noise
o Thermal-Overload Protection
o Output Current Limit
o Tiny TSSOP Power Package (1.5W)
30% Smaller than SOT223 (only 1.1mm high)
MAX1793
Low-Dropout, Low I
Q
, 1A Linear Regulator
________________________________________________________________
Maxim Integrated Products
1
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
N.C. N.C.
OUT
OUT
OUT
OUT
SET
GND
N.C.
TOP VIEW
MAX1793
TSSOP
IN
IN
RST
IN
IN
SHDN
N.C.
EP
Pin Configuration
NC
MAX1793
IN
IN
IN
IN
IN
OFF
ON
C
IN
SHDN
OUT
OUT
OUT
OUT
RST
SET
GND
C
OUT
OUT
RESET
OUTPUT
Typical Operating Circuit
19-1654; Rev 3; 1/12
Ordering Information
Ordering Information continued at end of data sheet
*
EP = Exposed pad.
Contact factory for other preset output voltages.
/V Denotes an automotive qualified part.
Note: Devices are also available in a lead(Pb)-free/RoHS-
compliant package. Specify lead-free by adding “+” to the part
number when ordering.
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
PART
TEMP
RANGE
PIN-
PACKAGE
V
OUT
( V)
MAX1793EUE-50 - 40°C to + 85°C 16 TSSOP-EP* 5.0 or Adj
MAX1793EUE-33 - 40°C to + 85°C 16 TSSOP-EP* 3.3 or Adj
MAX1793EUE-33/V - 40°C to + 85°C 16 TSSOP-EP* 3.3 or Adj
MAX1793
Low-Dropout, Low I
Q
, 1A Linear Regulator
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
IN
= V
OUT(NOM)
+ 0.5V or V
IN
= 2.5V (whichever is greater), SHDN = IN, T
A
= +0°C to +85°C, unless otherwise noted. Typical values
are at T
A
= +25°C.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
IN, SHDN, RST to GND ............................................-0.3V to +6V
OUT, SET to GND ........................................-0.3V to (V
IN
+ 0.3V)
Output Short-Circuit Duration ............................................Infinite
Continuous Power Dissipation (T
A
= +70°C)
TSSOP-EP (derate 19mW/°C above +70°C).....................1.5W
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Soldering Temperature (reflow)
Lead(Pb)-Free Packages..............................................+260°C
Packages Containing Lead(Pb)....................................+240°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Input Voltage V
IN
2.5 5.5 V
Input Undervoltage Lockout V
IN
2.0 2.3 V
Preset V
OUT
2.5V -1 +1
T
A
= +85°C,
I
OUT
= 250mA
Preset V
OUT
< 2.5V -1.5 +1.5
T
A
= 0°C to +85°C, I
OUT
= 250mA -2 +2
Output Voltage Accuracy
(Preset Mode, SET = GND)
T
A
= 0°C to +85°C, I
OUT
= 1mA to 1A,
V
IN
> V
OUT
+ 0.5V
-3 +3
%
T
A
= +85°C, I
OUT
= 250mA, V
IN
= 3V 1.229 1.250 1.271
T
A
= 0°C to +85°C, I
OUT
= 250mA, V
IN
= 3V 1.219 1.281
SET Voltage Threshold
(For Adjustable Output)
T
A
= 0°C to + 85°C , I
OU T
= 1m A to 1A, V
IN
= 3V 1.212 1.288
V
Adjustable Output Voltage
Range
1.25 5 V
Maximum Output Current I
OUT
Continuous, V
IN
3V 1 A
RM S
Short-Circuit Current Limit I
LIM
V
OUT
= 0V, V
IN
3V 1.1 1.8 3.3 A
In-Regulation Current Limit
V
OUT
within 4% of nominal output voltage,
V
IN
= 5.5V
2.8 A
SET Pin Dual Mode Threshold 50 150 mV
SET Input Bias Current I
SET
V
SET
= +1.25V ±100 nA
Ground Current I
GND
I
OUT
= 100µA 125 200 µA
MAX1793-33, -50 210 350
Dropout Voltage (Note 1) V
IN
- V
OUT
I
OUT
= 1A,
SET = GND
MAX1793-25 270 450
mV
Line Regulation V
LNR
V
IN
from (V
OUT
+ 0.1V) to +5.5V,
I
OUT
= 5mA, SET = GND
-0.15 0 +0.15 %/V
Load Regulation V
LDR
I
OUT
= 100µA to 1A 0.7 %
Output Voltage Noise 10Hz to 1MHz, C
OUT
= 6.8µF (ESR < 0.1) 115 µV
RMS
Shutdown Supply Current I
OFF
SHDN = GND, V
IN
= +5.5V 0.1 16 µA
Output Pulldown Resistance in
Shutdown
SHDN = GND 5 k
MAX1793
Low-Dropout, Low I
Q
, 1A Linear Regulator
_______________________________________________________________________________________
3
ELECTRICAL CHARACTERISTICS (continued)
(V
IN
= V
OUT(NOM)
+ 0.5V or V
IN
= 2.5V (whichever is greater), SHDN = IN, T
A
= +0°C to +85°C, unless otherwise noted. Typical values
are at T
A
= +25°C.)
ELECTRICAL CHARACTERISTICS
(V
IN
= V
OUT(NOM)
+ 0.5V or V
IN
= 2.5V (whichever is greater), SHDN = IN, T
A
= -40°C to +85°C, unless otherwise noted.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
V
IH
1.6
SHDN Input Threshold
V
IL
+2.5V < V
IN
< +5.5V
0.6
V
SHDN Input Bias Current I
SHDN
SHDN = GND or IN
0.01
A
RST Output Low Voltage VOL
I
SINK
= 1mA
0.1 V
Operating Voltage Range for
RST Valid
I
SINK
= 100µA 1.0 5.5
V
RST Output High Leakage V
RST
= +5.5V
0.01
A
RST Trip Level Referred to
Nominal V
OUT
Rising edge 90 94 96
% V
OUT
RST Release Delay Rising edge 1.5 4.0 8.0 ms
T
SHDN
Typical thermal hysteresis = 20°C 170 °C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Input Voltage
V
IN
2.5 5.5 V
Input Undervoltage Lockout
V
IN
2.0 2.3 V
I
OUT
= 250mA
-2.5 2.5
Output Voltage Accuracy
(preset mode, SET = GND)
I
OUT
= 1mA to 1A, V
IN
> V
OUT
+ 0.5V
-3.2 3.2
%
I
OUT
= 250mA, V
IN
= 3V
1.216 1.284
SET Voltage Threshold
(for adjustable output) I
OUT
= 1mA to 1A, V
IN
= 3V
1.210 1.290
V
Adjustable Output Voltage
Range
1.25 5 V
Maximum Output Current
I
OUT
Continuous, V
IN
3V
1
A
RMS
Short-Circuit Current Limit
I
LIM
V
OUT
= 0V, V
IN
3V
1.1 3.3 A
SET Pin Dual Mode Threshold 50 150 mV
SET Input Bias Current
I
SET
V
SET
= +1.25V
±100
nA
Ground Current
I
GND
I
OUT
= 100µA
200 µA
MAX1793-33, -50
350
Dropout Voltage (Note 1)
V
IN
-
V
OUT
I
OUT
= 1A,
SET = GND
MAX1793-25
450
mV
Line Regulation
V
LNR
V
IN
from (V
OUT
+ 0.1V) to +5.5V,
I
OUT
= 5mA, SET = GND
-0.15 0.15 %/V
Shutdown Supply Current
I
OFF
SHDN = GND, V
IN
= +5.5V
16 µA
V
IH
1.6
SHDN Input Threshold
V
IL
+2.5V < V
IN
< +5.5V
0.6
V
SHDN Input Bias Current
I
S H D N
SHDN = GND or IN 1 µA
RST Output Low Voltage
V
OL
I
SINK
= 1mA
0.1 V

MAX1793EUE33/V+T

Mfr. #:
Manufacturer:
Maxim Integrated
Description:
LDO Voltage Regulators Low-IQ 1A
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union