DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
-ST: STRAIGHT
ORIENTATION
-TH1: THROUGH HOLE
TERMINATION
-H: HEAVY GOLD
(MCX-J-P-F-ST-TH1-SHL)
(MCX-INS-006)
(MCX-J-P-H-ST-TH1-SKT)
PLATING SPECIFICATION
-P: PCB
TYPE
-J: JACK
GENDER
MCX-J-P-X-ST-TH1
DO NOT
SCALE FROM
THIS PRINT
8.510 .3350
(REF)
4.500 (REF).1772
2.700 .1063
(REF)
0.920 .0362
(REF)
0.500 .0197
(REF)
5.080 .2000
(REF)
6.000 .2362
(REF)
"A"
"A"
'B'
4.060 .1598
(REF)
3.450 .1358
(REF)
2.650 .1043
0.960 .0378
(REF)
'C'
SECTION "A"-"A"
(MCX-J-P-X-ST-TH1-SHL)
(MCX-INS-006)
(MCX-J-P-X-ST-TH1-SKT)
1.10 .043
5.08 .200
1.40 .055
(4 PLCS)
5.08 .200
RECOMMENDED PCB LAYOUT
0.45 .018
DETAIL 'B'
SCALE 16 : 1
2.750
-
0.150
+
0.050
.1083
-
.0059
+
.0020
TO INSULATOR
2.700 (REF).1063
TO CENTER CONTACT
1.360 .0535
TO CENTER CONTACT
'D'
DETAIL 'C'
SCALE 8 : 1
0.000 -
0.100 .0039
TO INSULATOR
DETAIL 'D'
SCALE 16 : 1
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
0.3 [.01] 2
.XX:
0.13 [.005]
.XXX:
0.051 [.0020]
MATERIAL:
MCX STRAIGHT, THROUGH HOLE JACK- 50 OHM
BY:
MCX-J-P-X-ST-TH1
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
R MUSSER
02/06/2008
1
1
SHEET SCALE: 5:1
C:\EnterpriseVault\DWG\MISC\MKTG\MCX-J-P-X-ST-TH1-MKT.SLDDRW
CONTACT: COPPER ALLOY
SHELL: BRASS
DIELECTRIC: PTFE
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. PUSHOUT FORCE FOR INSULATOR: 20 N[4.5 LB] MIN.
3. PUSHOUT FORCE FOR CENTER CONTACT: 10 N [2.25 LB] MIN.
4. PRODUCT TO BE PACKAGED PER PACKAGING STANDARD CO-HD-WI-3040-M.
5. RoHs COMPLIANT.
6. PLATING: -H: .000030" MIN GOLD OVER .000050" MIN NICKEL
-F: .000003" MIN GOLD OVER .000050" MIN NICKEL
7. ASSEMBLY PLATING DESIGNATIONS:
-H: (CENTER CONTACT) -H
(OUTER CONTACT) -F
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION D
