Working Peak Reverse Voltage:5.0-190 Volts
Peak Pulse Power:200 Watts
RoHS Device
Features
-Glass passivated chip.
-Low leakage current.
-200W peak pulse power capility with a 10/1000us
waveform,repetitive rate (duty cycle):0.01%.
-Uni and bidirectional unit.
-Excellent clamping capability.
-Very fast response time.
Mechanical data
-Case: Molded plastic.
-Epoxy: UL 94V-0 rate flame retardant.
-Lead: Solderable per method 2026.MIL-STD-750,
-Polarity: Color band denotes cathode end
except bipolar.
-Mounting position: Any.
Dimensions in inches and (millimeter)
SOD-123
Parameter
Symbol
Value
Unit
Maximum Rating and Electrical Characteristics
Power dissipation on infinite heatsink at TL = 75°C
0.4
PD W
200
W
PPP
Peak power dissipation at 10/1000µs waveform (Note 1)
1000
W
PPP
Peak power dissipation at 8/20µs waveform (Note 1)
Peak forward surge current, 8.3ms single half sone-wave
undirestional only (Note 2)
20
IFSM
A
A
Peak pulse current with a 10/1000µs waveform (Note 1)
See next table
IPP
0.053 (1.33)
0.037 (0.93)
0.01 (0.25)min
0.008 (0.20)max
0.152 (3.82)
0.140 (3.51)
0.071 (1.78)
0.055 (1.38)
0.112 (2.81)
0.100 (2.51)
0.044 (1.09)
0.031 (0.77)
Operating junction and storage temperature range
-55 to +150
TJ,TSTG
°C
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Notes:
2. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.
SMD Transient Voltage Suppressor
Page 1
QW-BTV15
REV:D
Comchip Technology CO., LTD.
TV02W5V0-G Thru. TV02W191-G
Max.instantaneous forward voltage at 25A for
undirestional only
VF
3.5
V
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig.1
-Weight: 0.016 grams.
3. Company reserves the right to improve product design , functions and reliability without notice.
Circuit Diagram
Uni-directional
Bi-directional