Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before orderin
.
2010.5.7
MPD5D01*S Specification
12
13. 3 Storage
13. 3. 1 Please store the products in room where the temperature/humidity is stable and direct sunlight cannot
come in, and use the products within 6 months after delivery.
Please avoid damp and heat or such places where the temperature greatly changes, as water may
condense on this product, and the quality of characteristics may be reduced, and/or be the solderability
may be degraded.
If this product needs to be stored for a long time (more than 1 year), this product may be degraded
in solderability and/or corroded. Please test the solderability of this product regularly.
13. 3. 2 Please do not store this product in the conditions such as a dusty place, a place exposed directly to sea
breeze, or in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on).
13. 4 Operational Environment and Operational Conditions
13. 4. 1 Operational Environment
This product is not water-, chemical- or corrosion-proof.
In order to prevent leakage of electricity and abnormal temperature rise of this product, do not use this
product in the following conditions:
(1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on)
(2) in a dusty place
(3) in a place exposed to direct sunlight
(4) in such a place where water splashes or in such a humid place where water condenses
(5) in a place exposed to sea breeze
(6) in any other places similar to the above
13. 4. 2 Operational Conditions
Please use this product within specified values (power supply, temperature, input, output, load condition,
and so on).
If not used within the specified values, defectiveness and deterioration of this product may be caused.
Even if this product can endure the condition for short time, it may cause degradation of reliability.
It is recommended that a fuse is inserted in input line (Vin) to secure safety in any abnormality such as
internal circuit of Isolated DC-DC Converter broken down.
Also please take care that the external voltage over output voltage of DC-DC Converter does not applies
to output of this Isolated DC-DC Converter.
13. 4. 3 Note prior to use
Defectiveness and reliability degradation may be caused if high static electricity, over rated voltage or
reverse voltage are applied to this product. Please be sure to avoid the followings:
(1) over rating power supply, reverse power supply or inadequate connection of 0 V(DC)line
(2) electrostatic discharge from production line and/or operator
(3) electrified product from electrostatic induction
Please avoid an excessive mechanical shock.
If this product is dropped on the floor, etc., a crack to the core of inductors and monolithic ceramic
capacitors may occur.
Please handle with care to avoid a strong shock to this product.
Do not give excessive mechanical stress to the product with your handling.
Please control to bend in a maximum of 0.2mm in your application.
13. 5 Transportation
When transporting this product, please pack it in order to avoid damage by mechanical vibration or
mechanical shock, and please give instructions and set guidelines to the carriers to prevent rough handling.
When transporting this product overseas (in particular, by sea), bad environment of transportation may be
expected, therefore please pack this product considering mechanical strength, vibration-resistance and
humidity-resistance.
The packaging designed for domestic sales may not suitable for overseas transportation.
Please contact us if this product with domestic packing is transported overseas.
14. ! Note
1. Murata recommends that customers ensure that the evaluation and testing of these devices are completed with
this product actually assembled on their product.
2. All the items and parameters in this product specification have been prescribed on the premise that Murata’s
product is used for the purpose, under the condition and in the environment mutually agreed upon.
This document is for reference only and subject to revision without prior of subsequent notice.
Please contact Murata for latest documentation.
