OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

DVK91205

P1-P3P4-P6P7-P9P10-P12P13-P14
MLX91205
IMC-Hall
®
Current Sensor (Triaxis
®
Technology)
3901091205 Page 10 of 14 Data Sheet
Rev 012 June/13
13 Application Diagram
13.1 Direct Single Ended Output
For reliable operation within the specifications the sensor must be connected as follows:
MLX91205
Vdd
PC
PV
PD
A_Out
+5V
100 nF*
2
4
7
NC
CO_Out
GND
GND
GND
6
5
8
1
3
GND
1 nF1 nF
GND
Full Scale Output =
2.5 +/-2.25 Volts
Vout = A_out
GND
* if the supply voltage is disturbed by EMI it can be useful to place a second capacitor (100pF ceramic)
parallel to the 100nF capacitor.
13.2 Direct Differential Output
For reliable operation within the specifications the sensor must be connected as follows:
MLX91205
Vdd
PC
PV
PD
A_Out
+5V
100 nF*
2
4
7
NC
CO_Out
GND
6
5
8
1
3
1 nF1 nF
Full Scale Output =
0 +/-2.25 Volts
Vout =
A_out - CO_out
GND
GNDGNDGND
* if the supply voltage is disturbed by EMI it can be useful to place a second capacitor (100pF ceramic)
parallel to the 100nF capacitor.
MLX91205
IMC-Hall
®
Current Sensor (Triaxis
®
Technology)
3901091205 Page 11 of 14 Data Sheet
Rev 012 June/13
14 Standard information regarding manufacturability of Melexis
products with different soldering processes
Our products are classified and qualified regarding soldering technology, solderability and moisture sensitivity
level according to following test methods:
Reflow Soldering SMD’s (Surface Mount Devices)
IPC/JEDEC J-STD-020
Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices
(classification reflow profiles according to table 5-2)
EIA/JEDEC JESD22-A113
Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing
(reflow profiles according to table 2)
Wave Soldering SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices)
EN60749-20
Resistance of plastic- encapsulated SMD’s to combined effect of moisture and soldering heat
EIA/JEDEC JESD22-B106 and EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Iron Soldering THD’s (Through Hole Devices)
EN60749-15
Resistance to soldering temperature for through-hole mounted devices
Solderability SMD’s (Surface Mount Devices) and THD’s (Through Hole Devices)
EIA/JEDEC JESD22-B102 and EN60749-21
Solderability
For all soldering technologies deviating from above mentioned standard conditions (regarding peak
temperature, temperature gradient, temperature profile etc) additional classification and qualification tests
have to be agreed upon with Melexis.
The application of Wave Soldering for SMD’s is allowed only after consulting Melexis regarding assurance of
adhesive strength between device and board.
Melexis is contributing to global environmental conservation by promoting lead free solutions. For more
information on qualifications of RoHS compliant products (RoHS = European directive on the Restriction Of
the use of certain Hazardous Substances) please visit the quality page on our website:
http://www.melexis.com/quality.aspx
MLX91205
IMC-Hall
®
Current Sensor (Triaxis
®
Technology)
3901091205 Page 12 of 14 Data Sheet
Rev 012 June/13
15 ESD Precautions
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor products. A
well designed (capacitors close to pins and low resistive ground layout) PCB layout will help to improve ESD
robustness.
16 Package Information
16.1 Package Dimensions
0.19
0.25
NOTES:
All dimensions are in millimeters (anlges in degrees).
* Dimension does not include mold flash, protrusions or
gate burrs (shall not exceed 0.15 per side).
** Dimension does not include interleads flash or protrusion
(shall not exceed 0.25 per side).
*** Dimension does not include dambar protrusion.
Allowable dambar protrusion shall be 0.08 mm total in
excess of the dimension at maximum material condition.
Dambar cannot be located on the lower radius of the foot.
5.84
6.20**
1.27 TYP
4.80
4.98*
1.55
1.73
0.127
0.250
1.40
1.55
0.35
0.49***
3.81
3.99**
0°
8°
0.41
0.89
P1-P3P4-P6P7-P9P10-P12P13-P14

DVK91205

Mfr. #:
Buy DVK91205
Manufacturer:
Melexis
Description:
Current Sensor Development Tools Development kit to evaluate the current sensors MLX91205 1 MLX91205LB mounted on PCB_EC01 1 MLX91205LB mounted on PCB_EC02 1 separate MLX91205LB 3 separate MLX91205HBs
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet