OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

03S150-C10S3

P1-P3
Technical Data Sheet
RPC-3.50
Calibration Load
Plug
03S150-C10S3
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Email : info@rosenberger.de
Page
1 / 3
RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
All dimensions are in mm; tolerances according to ISO 2768 m-H
Interface
According to IEC 60169-23
Mechanically compatible with RPC-2.92 and SMA
Documents
Application note AN001 “Calibration Services”
Material and plating
Connector parts Material Plating
Center conductor CuBe Gold, min. 1.27 µm, over nickel
Outer conductor Stainless steel Passivated
Coupling nut Stainless steel Passivated
Dielectric PEEK
Substrate Al
2
O
3
Technical Data Sheet
RPC-3.50
Calibration Load
Plug
03S150-C10S3
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Email : info@rosenberger.de
Page
2 / 3
RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
Electrical data
Frequency range DC to 26.5 GHz
Return loss 40 dB, DC to 4 GHz
35 dB, 4 GHz to 8 GHz
30 dB, 8 GHz to 26.5 GHz
DC Resistance 50 0.25
Power handling ≤ 0.5 W
Mechanical data
Mating cycles 500
Maximum torque 1.70 Nm
Recommended torque 0.90 Nm
Gauge 0.00 mm to 0.04 mm
General standard definitions
For proper operation the vector network analyzer (VNA) needs a model describing the electrical behaviour
of this calibration standard. The different models, units, and terms used will depend on the VNA type and they
will have to be entered into the VNA. All values are based on typical geometry and plating.
Offset Z
o
/ Impedance / Z
o
50
Offset Delay 0.0000 ps
Length (electrical) / Offset Length 0.00 mm
Offset Loss 0.00 GΩ/s
Loss 0.0000 dB/
GHz
Environmental data
Operating temperature range
1
+20 °C to +26 °C
Rated temperature range of use
2
0 °C to +50 °C
Storage temperature range -40 °C to +85 °C
RoHS compliant
1
Temperature range over which these specification are valid.
2
This range is underneath and above the operating temperature range, within the calibration load is fully functional
and could be used without damage.
Technical Data Sheet
RPC-3.50
Calibration Load
Plug
03S150-C10S3
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Email : info@rosenberger.de
Page
3 / 3
RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
Declaration of calibration options
Factory Calibration
Standard delivery for this calibration standard includes a Factory Calibration. The Calibration Certificate issued
reports individual calibration results, traceable to national / international standards. Model based standard
definitions are reported in an Agilent/Keysight, Rohde & Schwarz and Anritsu compatible VNA format.
Accredited Calibration
Optional this calibration standard can be delivered with an Accredited Calibration (DAkkS) having the highest
confidence in the traceability. The DAkkS Calibration Certificate issued reports individual calibration results in
a complex format, traceable to national / international standards. Model based standard definitions are
reported in an Agilent/Keysight, Rohde & Schwarz and Anritsu compatible VNA format as well as in a dense
data set needed for data based standard definitions. The uncertainties are smaller than in a Factory
Calibration.
For further, more detailed information see application note AN001 on the Rosenberger homepage.
Calibration interval
Recommendation 12 months
Packing
Standard 1 pce in box
Weight 8.8 g/pce
Draft Date Approved Date Rev. Engineering change number Name Date
Herbert Babinger 17.10.14 Martin Moder 17.10.14 g00 14-1492 Herbert Babinger 17.10.14
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve ou
r
products, we reserve the right to make changes judged to be necessary.
P1-P3

03S150-C10S3

Mfr. #:
Buy 03S150-C10S3
Manufacturer:
Rosenberger
Description:
RF Connector Accessories CALIBRATION LOAD
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet