Toll Free: (800) 494-6104
Wiha Quality Tools
106
Wiha Insulated Pliers & Cutters
1000volt
Item
No. mm Inch Pkg. wt.
328 35 Z16016006 160 6.3 #6 1 .54
328 36 Z16018006 180 7.0 #5 1 .57
328 38 Z16020006 200 8.0 #4 1 .64
High Leverage Diagonal Cutters. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E,
up to 1000 volt. Individually Tested. DIN ISO 5749
Semi-circular. Low wear lap joint, riveted and able to withstand high
levels of load. Lightweight action, clean cutting. Long term cutting is
achieved through additional inductive hardening to approx. 64 HRC.
C 60 special tool steel hardened and tempered to high quality. For soft,
hard and piano wire, lay-on joint, optimized power transmission.
328
Insulated High Leverage Diagonal Cutters
1000volt
Item Min Max
No. mm Inch mm mm Pkg. wt.
328 46 Z50023006 210 8.3 17 40 1 .98
328 48 Z50017006 170 6.5 10 60 1 .67
Cable Cutters. Insulation According to VDE 0682/part 201,
EN/IEC 60900, ASTM F-1505-01, NFPA70E, up to 1000 volt.
Individually Tested. Drop-forged from durable CV steel, cutters
additionally induction hardened, chrome & nickel plated, Mirror-polished.
For copper and aluminum cables (not for steel wires), integrated release
spring, one-hand locking, adjustable joint, anti-squeeze feature.
328
Insulated Cable Cutters
Cutting Capacity
Copper AWG
Insulated Long Nose Pliers
1000volt
Item
No. mm Inch Pkg. wt.
328 06 Z05016006 160 6.3 #10 1 .32
328 08 Z05020006 200 8.0 #8 1 .42
Long Nose Pliers With Cutters. Insulation According to
VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E,
up to 1000 volt. Individually Tested. Drop-forged from special tool
steel, cutters additionally induction hardened (approx. 60 HRC), chrome-
nickel plated, mirror-polished, ergonomic comfort grip with slip guard,
half-round jaws, serrated gripping surface.
328
Cutting Capacity
Copper AWG
Item
No. mm Inch Pkg. wt.
328 61 Z14016006 160 6.3 #6 1 .54
Diagonal Cutters W/Stripping Holes. Insulation According
to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E,
up to 1000 volt. Individually Tested.
Drop-forged from special tool steel, cutters additionally induction
hardened (approx. 60 HRC), chrome-nickel plated, mirror-polished.
Ergonomic comfort grip with slip guard. Holes in the cutting edge for
stripping copper wire of Ø 1.5 and 2.5. Strips AWG sizes #10 & #14.
328
Insulated Electrician’s Diagonal Cutters
1000volt
Cutting Capacity
Copper AWG
Warning! Insulated tools are not intended for use on live or energized circuits. Always disconnect
and de-energize all equipment & circuits. NEVER!
work on live or energized circuits or equipment.
Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation
Inspect insulation prior to each use of any insulated tool
If you doubt the integrity of the insulation destroy the tool or have it retested
Use insulated tools where the ambient temperature is between -20 to +70
O
C
Have a qualified safety technician inspect and re-certify tools annually for safe use
Go To
Image Index
Go To
Numerical Index
I
N
D
E
X
SHOP
SHOP
SHOP
SHOP
PREVIOUS NEXT
