TMPG06-10A thru TMPG06-43A
www.vishay.com
Vishay General Semiconductor
Revision: 04-Nov-16
1
Document Number: 88404
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PAR
®
Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Available in uni-directional polarity only
• 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle):
0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: MPG06, molded epoxy over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: color band denotes cathode end
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above T
A
= 25 °C per fig. 2
(2)
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
PRIMARY CHARACTERISTICS
V
BR
10 V to 43 V
V
WM
8.55 V to 36.8 V
P
PPM
400 W
P
D
1.0 W
I
FSM
40 A
T
J
max. 185 °C
Polarity Uni-directional
Package MPG06
MAXIMUM RATINGS (T
A
= 25 °C unless otherwise noted)
PARAMETER SYMBOL VALUE UNIT
Peak pulse power dissipation with a 10/1000 μs waveform
(1)
(fig. 1) P
PPM
400 W
Peak pulse current with a 10/1000 μs waveform
(1)(2)
(fig. 3) I
PPM
See next table A
Power dissipation on infinite heatsink at T
L
= 75 °C (fig. 5) P
D
1.0 W
Peak forward surge current 8.3 ms single half sine-wave
(2)
I
FSM
40 A
Maximum instantaneous forward voltage at 25 A
(2)
V
F
3.5 V
Operating junction and storage temperature range T
J
, T
STG
-65 to +185 °C
