OBSOLETE
Data Sheet No. PD10021E
Series PVA33
Microelectronic Power IC
BOSFET
®
Photovoltaic Relay
Single-Pole, 130mA, 0-300V AC/DC
General Description
The Photovoltaic AC Relay (PVA) is a single-pole,
normally open solid state replacement for electro-
mechanical relays used for general purpose switch-
ing of analog signals. It utilizes as an output switch a
unique bidirectional (AC or DC) MOSFET power IC
termed a BOSFET. The BOSFET is controlled by a
photovoltaic generator of novel construction, which
is energized by radiation from a dielectrically
isolated light emitting diode (LED).
The PVA overcomes the limitations of both conven-
tional and reed electromechanical relays by offering
the solid state advantages of long life, high operat-
ing speed, low pick-up power, bounce-free opera-
tion, low thermal voltages and miniaturization. These
advantages allow product improvement and design
innovations in many applications such as process
control, multiplexing, telecommunications, automatic
test equipment and data acquisition.
The PVA can switch analog signals from thermo-
couple level to 300 volts peak AC or DC polarity.
Signal frequencies into the RF range are easily
controlled and switching rates up to 5kHz are achiev-
able. The extremely small thermally generated offset
voltages allow increased measurement accuracies.
Unique silicon technology developed by International
Rectifier forms the heart of the PVA. The monolithic
BOSFET contains a bidirectional N-channel power
MOSFET output structure. In addition, this power IC
chip has input circuitry for fast turn-off and gate pro-
tection functions. This section of the BOSFET chip
utilizes both bipolar and MOS technology to form
NPN transistors, P-channel MOSFETs, resistors,
diodes and capacitors.
The photovoltaic generator similarly utilizes a unique
International Rectifier alloyed multijunction structure.
The excellent current conversion efficiency of this
technique results in the very fast response of the
PVA microelectronic power IC relay.
This advanced semiconductor technology has
created a radically new control device. Designers can
now develop switching systems to new standards of
electrical performance and mechanical compactness.
Features
BOSFET Power IC
■■
■■
■
10
10
Operations
■■
■■
■
100µsec Operating Time
■■
■■
■
0.2µVolt Thermal Offset
■■
■■
■
3 milliwatts Pick-Up Power
■■
■■
■
1000V/µsec dv/dt
■■
■■
■
Bounce-Free
■■
■■
■
8-pin DIP Package
■■
■■
■
-40°C to 85°C
■■
■■
■
UL recognized
■■
■■
■
Part Identification
Part Number Operating Sensitivity Off-State
Voltage (AC/DC) Resistance
PVA2352 0 - 200V 5mA 10
8
Ohms
PVA3324
0 – 300V
2 mA
10
10
Ohms
PVA3354 5mA
(BOSFET is a trademark of International Rectifier)
Replaced by PVA33N