Working Peak Reverse Voltage: 11 to 440 Volts
Power Dissipation: 5000 Watts
RoHS Device
Page 1
Features
-Glass passivated chip.
-Low leakage.
-Excellent clamping capability.
-Very fast response time.
Mechanical data
-Case: DO-214AB(SMC), molded plastic.
-Approx. weight: 0.21 grams.
-5000W peak pulse power capability with a 10/1000 sμ
waveform, repetitive rate (duty cycle ): 0.01%.
ATV50C110-HF Thru. ATV50C441-HF
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeter)
AQW-JTV04
Notes:
2. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per maximum per minute maximum.
3. VF<3.5V for devices of VBR <200V and VF <5.0V for devices of VBR>201V
Comchip Technology CO., LTD.
Peak power dissipation with a 10/1000μs
waveform (Note 1)
Peak pulse current on 10/1000μs waveform (1)
Power dissipation on infinite heatsink at
TL=75°C
Peak forward surge current, 8.3ms single
half sine-wave uni-directional only (Note 2)
Maximum instantaneous forward voltage
at 100A for uni-directional only (Note 3)
Operating junction temperature
Storage temperature range
Value
UnitsSymbolCharacteristics
PPP
IPP
PD
IFSM
VF
TJ
TSTG
5000
See Next Table
6.5
300
3.5/5.0
-55 to +150
-55 to +150
W
A
W
A
V
°C
°C
DO-214AB (SMC)
0.245(6.15)
0.220(5.52)
0.126(3.16)
0.114(2.86)
0.320(8.02)
0.305(7.64)
0.012(0.30)
0.006(0.15)
0.008(0.20)
0.000(0.00)
0.060(1.51)
0.030(0.75)
0.103(2.59)
0.079(1.98)
0.280(7.02)
0.260(6.52)
REV:A
1. Non-Repetitive current pulse per Fig.5 and derated above TA=25°C per Fig .1
SMD Transient Voltage Suppressor
Halogen Free
Company reserves the right to improve product design , functions and reliability without notice.
-Lead: Solderable per MIL-STD-750,
method 2026.
-Polarity: Color band denotes cathode end.
except bipolar.
-Epoxy: UL 94V-0 rate flame retardant.
-Comply with AEC-Q101.