VSC8244XHG

Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability

whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction

with mission-critical equipment or applications. Any performance specifi cations are believed to be reliable but are not verifi ed, and Buyer must conduct and complete all performance and other testing of the products, alone

and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifi cations or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine suitability

of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer.

Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in

this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice.

Y

+

_ _

_ K_

[ : ]_

MAC I/F

Y

Y

_ K_

[7: ]

K

_

_

K

Applicationss

• High density 10/100/100BASE-T LAN &

MAN switches and routers

port server NICs

Specifi cations

• Steady state power consumption per port

• I/O power supply voltage options

• Analog supply voltage

• Core power supply voltage

• Crystal parallel resonant frequency

(±100ppm tolerance)

©2004–2016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks

and service marks are the property of their respective owners.

VPPD-00407. 1.0. 4/16

Features

• Lowest power consumption in the industry at less than

640mw/port (1000BASE-T mode)

• Patented, low EMI line driver with integrated line side termina-

• >10 kB jumbo frame support with programmable synchroniza-

tion FIFOs

• Five direct drive LEDs with on-chip liltering interface option

• Serial LED interface option

• Three user confi guration options: 1) Optional serial EEPROM, 2)

Hardware confi guration pins, or 3) Serial Management Interface

(SMI)

• Full suite of BIST, MAC, and far-end loopback modes

• VeriPHY™ link cable diagnostics software suite

• Automatic detection and correction of cable pair swaps, pair

switches

• Removes 576 passive components in 48-port switch applica-

tions

• Compatible with a wide variety of parallel I/F switch ICs

• Simplifi es PCB layout; eliminates PCB trombones

• Ensures seamless deployment throughout copper networks

with industry’s highest tolerance to noise and substandard

cable plants

• Provides for maximum jumbo frame sizes in custom SAN and

LAN systems