Coil Data
Nom.
Coil
Coil Circuit Coil Circuit
Pickup
Base Turn
Pickup
Base Turn
Drop-Out Drop-Out
Nom. Coil
Coil
Resistance
Current Current
Voltage
On Current
Voltage
On Current
Voltage Voltage
Power
Max.
Coil
Voltage
in Ohms
mA (Max.) mA (Min.)
Vdc (Max.)
mA (Max.)
Vdc (Max.)
mA (Max.)
Vdc (Min.) Vdc (Min.)
(mW)
Coil
Desig.
(Vdc)
±10% @ 25°C @ 25°C
@ 25°C
@ 125°C
@ 125°C
@ 25°C @ -65°C
@ 25°C
Voltage
(Note 1)
(Note 1&2) (Note 1&2)
(Note 2) (Note 2) (Note 2) (Note 2)
MA/MAD
5.0 50 n/a n/a 2.7 n/a 3.5 n/a 0.22 0.14 500 5.8 5
6.0 98 n/a n/a 3.5 n/a 4.5 n/a 0.28 0.18 367 8.0 6
9.0 220 n/a n/a 5.3 n/a 6.8 n/a 0.54 0.35 368 12.0 9
12.0 390 n/a n/a 7.0 n/a 9.0 n/a 0.63 0.41 369 16.0 12
18.0 880 n/a n/a 10.5 n/a 13.5 n/a 0.91 0.59 368 24.0 18
26.5 1,560 n/a n/a 14.2 n/a 18.0 n/a 1.37 0.89 450 32.0 26
30.0 2,500 n/a n/a 17.7 n/a 22.0 n/a 1.50 1.00 360 36.0 30
MADD
5.0 39 128.2 93.2 3.2 n/a 4.0 n/a 0.6 0.6 641 5.8 5
6.0 78 78.3 58.3 4.0 n/a 5.0 n/a 0.7 0.7 462 8.0 6
9.0 220 42.9 33.0 6.3 n/a 7.8 n/a 0.9 0.8 368 12.0 9
12.0 390 32.8 25.6 8.0 n/a 10.0 n/a 1.1 0.9 369 16.0 12
18.0 880 22.1 17.5 11.5 n/a 14.5 n/a 1.4 1.1 368 24.0 18
26.5 1,560 18.5 14.8 15.2 n/a 19.0 n/a 1.8 1.4 450 32.0 26
Notes: 1. Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25°C for 5 seconds max.
2. Set base current at 3 mA to 15 mA during measurements.
1-11
Double Pole, Electrically Held, 1 Amp and Less (Continued)
CII Low Signal Relays
CII Low Signal Relays
1
Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers
Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com
Specifications subject UK: +44 800 267 666
www.te.com to change.
Operating Characteristics
Timing —
Operate Time — 2.0 ms max.
Release Time —
MA — 1.5 ms max.
MAD/MADD — 4.0 ms max.
(suppression diode, suppression/
steering diodes)
Contact Bounce — 1.5 ms max
Dielectric Withstanding Voltage —
Between Open Contacts —
500 Vrms 60 Hz
Between Adjacent Contacts —
500 Vrms 60 Hz
Between Contacts & Coil —
500 Vrms 60 Hz
Insulation Resistance —
10,000 megohms min. @ 500 Vdc
1,000 megohms @ 500 Vdc
(coil to case @ +125°C)
Environmental Characteristics
Temperature Range —
-65°C to +125°C
Weight —
0.09 oz. (2.55 grms)
0.10 oz. (2.80 grms) with spreader pad
attached
Vibration Resistance —
30 G’s, 10 to 3,000 Hz
Shock Resistance —
75 G’s, 6 ±1 ms max.
QPL Approval —
MIL-R-39016/9 (JMA)
MIL-R-39016/15 (JMAD)
MIL-R-39016/20 (JMADD)
Semiconductor Characteristics
Diode —
100 Vdc peak inverse voltage (PIV)
1.0 Vdc max. transient voltage
Specifying a Part Number Example: Type Terminal Diodes Ground Pins Coils Spreader/Mounting Pads
MA CDG-26 S
Spreader & Mounting Pads
MA, MAD, MADD (Continued)
.370 (9.40) SQ MAX
.100 (2.54)
.100 (2.54)
.103 (2.62)
.150 (3.81)
.156 (3.96)
.395 (10.03) SQ MAX
.100 (2.54)
0.47 (1.19) DIA
.014±.003 (0.36)
.140 – .175 DIA
(3.56 – 4.45)
S S2 W
Ordering Instructions
Catalog-selected Relays: The catalog number is derived by choosing the proper CODE for
each of the relay characteristics in the order in which the codes are listed.
* The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15.
