http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2010.9.9
Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type)
2.3 (typ.)
0.85 (typ.)
6.0±0.2
6.0±0.2
1.65±0.2
1.65±0.2
6.0±0.2 4.3±0.2
(0.2)
(in mm)
Chip Inductor (Chip Coil) Power Inductor (Wire Wound Type)
LQH6PP Series (2424 Size)
■ Dimensions ■ Packaging
Code Packaging Minimum Quantity
L 180mm Embossed Tape 250
K 330mm Embossed Tape 1500
■ Rated Value (p: packaging code)
Part Number Inductance
Rated Current
(Based on Inductance Change)
Rated Current
(Based on Temperature Rise)
DC Resistance
Self Resonance
Frequency (min.)
LQH6PPN1R0N43p
1.0µH±30% 7.50A 4.30A 0.009ohm±30% 110MHz
LQH6PPN1R5N43p
1.5µH±30% 6.50A 4.15A 0.010ohm±30% 60MHz
LQH6PPN2R2N43p
2.2µH±30% 5.60A 4.10A 0.014ohm±30% 30MHz
LQH6PPN3R3N43p
3.3µH±30% 4.50A 3.80A 0.016ohm±30% 30MHz
LQH6PPN4R7M43p
4.7µH±20% 4.00A 3.20A 0.020ohm±30% 25MHz
LQH6PPN6R8M43p
6.8µH±20% 3.20A 2.85A 0.028ohm±30% 20MHz
LQH6PPN100M43p
10µH±20% 2.60A 2.60A 0.044ohm±30% 15MHz
LQH6PPN150M43p
15µH±20% 2.20A 2.20A 0.065ohm±30% 10MHz
LQH6PPN220M43p
22µH±20% 1.70A 1.55A 0.108ohm±30% 10MHz
LQH6PPN330M43p
33µH±20% 1.60A 1.29A 0.137ohm±30% 6MHz
LQH6PPN470M43p
47µH±20% 1.25A 1.10A 0.230ohm±30% 6MHz
LQH6PPN680M43p
68µH±20% 1.10A 1.00A 0.289ohm±30% 5MHz
LQH6PPN101M43p
100µH±20% 0.92A 0.80A 0.436ohm±30% 3MHz
Test Frequency: 100kHz Class of Magnetic Shield: Magnetic shield of magnetic powder in resin
Operating Temperature Range (Self-temperature rise is included): -40°C to +125°C
Operating Temperature Range (Self-temperature rise is not included): -40°C to +85°C
Only for reflow soldering.
Continued on the following page.
