PL123S-05/-09
Spread-Compatible Low Skew Zero Delay Buffer
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1(408) 94 4 -0800 • fax +1(408) 474- 1000 • www.micr el.com R ev 12/14/11 Page 9
ORDERING INFORMATION
Micrel Inc., reserves the right to make changes in its products or specifications, or both at any ti m e without notice. The information furnis hed by Micrel
is beli eved to be accur ate and reliable. However, Micrel makes no guara ntee or warranty concerning the accuracy of s aid informat ion and shall no t be
respon sible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product.
LIFE SUPPORT POLICY: Micrel’s pr oducts are not au thorized for use as critical compo nents in life sup port device s or systems without the express
written approval of the President of Mic rel Inc.
For part ordering, please contact our Sales Department:
2180 Fortune Drive, San Jose, CA 95131, USA
Tel: (408) 944-0800 Fax: (408) 474-1000
PART NUMBER
The order number for this device is a combination of the following:
Part number, Package type and Operating temperature range
PL123S-0x(H) X X - X
Part Number
H=High Drive
None = Standard Drive
Package Type
O=TSSOP
S=SOP
None=Tubes
R=Tape & Reel
Temperature Range
C=Commercial (0°C to 70°C)
I=Industrial (-40°C to 85°C)
8-Pin SOP (Tape and Reel)
8-Pin SOP (Tape and Reel)
16-Pin TSSOP (Tape and Reel)
16-Pin TSSOP (Tape and Reel)
16-Pin SOP (Tape and Reel)
16-Pin SOP (Tape and Reel)
