ZL40200 Data Sheet
6
Microsemi Corporation
3.0 Functional Description
The ZL40200 is an LVPECL clock fanout buffer with two identical output clock drivers capable of operating at
frequencies up to 750MHz.
Inputs to the ZL40200 are externally terminated to allow use of precision termination components and to allow full
flexibility of input
termination. The ZL40200 can accept DC coupled LVPECL or LVDS and AC coupled LVPECL,
LVDS, CML or HCSL input signals; single ended input signals can also be accepted. A pin compatible device with
internal termination is also available.
The ZL40200 is designed to fan out
low-jitter reference clocks for wired or optical communications applications
while adding minimal jitter to the clock signal. An internal linear power supply regulator and bulk capacitors
minimize additive jitter due to power supply noise. The device operates from 2.5V+/-5% or 3.3V+/-5% supply. Its
operation is guaranteed over the industrial temperature range -40°C to +85°C.
The device block diagram is shown in Figure 1; its operation is described in the following sections.
3.1 Clock Inputs
The device can accept LVPECL, LVDS, CML, HCSL and single-ended inputs.
VDD_driver
R2 R2
R1 R1
VDD_driver
VDD
VDD_driver=3.3V: R1=127 ohm, R2=82 ohm
VDD_driver=2.5V: R1=250 ohm, R2=62.5 ohm
ZL40200
clk_p
clk_n
Z
o
= 50 Ohms
Z
o
= 50 Ohms
LVPECL
Driver
22 Ohms
22 Ohms
Figure 3 - LVPECL Input DC Coupled Thevenin Equivalent