© Semiconductor Components Industries, LLC, 2013
April, 2017 − Rev. 4
1 Publication Order Number:
NCP612/D
NCP612, NCV612
100 mA CMOS Low Iq
Voltage Regulator in an
SC70-5
The NCP612/NCV612 series of fixed output linear regulators are
designed for handheld communication equipment and portable battery
powered applications which require low quiescent. The
NCP612/NCV612 series features an ultra−low quiescent current of
40 A. Each device contains a voltage reference unit, an error
amplifier, a PMOS power transistor, resistors for setting output
voltage, current limit, and temperature limit protection circuits.
The NCP612/NCV612 has been designed to be used with low cost
ceramic capacitors. The device is housed in the micro−miniature
SC70−5 surface mount package. Standard voltage versions are 1.5,
1.8, 2.5, 2.7, 2.8, 3.0, 3.1, 3.3, 3.7, and 5.0 V.
Features
• Low Quiescent Current of 40 A Typical
• Low Dropout Voltage of 230 mV at 100 mA and 3.0 V V
out
• Low Output Voltage Option
• Output Voltage Accuracy of 2.0%
• Temperature Range of −40°C to 85°C (NCP612)
Temperature Range of −40°C to 125°C (NCV612)
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
Typical Applications
• Cellular Phones
• Battery Powered Consumer Products
• Hand−Held Instruments
• Camcorders and Cameras
Figure 1. Typical Application Diagram
This device contains 86 active transistors
Vout
Battery or
Unregulated
Voltage
C1
C2
OFF
ON
1
2
3
5
4
+
+
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
ORDERING INFORMATION
SC70−5
CASE 419A
PIN CONNECTIONS
1
3
N/C
V
in
2
Gnd
Enable
4
V
out
5
(Top View)
xxx = Specific Device Code
M = Date Code*
G = Pb−Free Package
MARKING DIAGRAM
www.
onsemi.com
1
5
xxxM G
G
(Note: Microdot may be in either location)