SPECIFICATION CONTROL DRAWING
TE Connectivity
300 Constitution Drive
Menlo Park, CA 94025 USA
RAYCHEM
TITLE : (1 TO 1 SPLICES-CRIMP)
SOLDERSHIELD SPLICE KIT,
SHIELDED CABLE
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets.
DOCUMENT NO.: D-150-0168-0170/0174-0181
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
15-Apr-11
DOC ISSUE:
10
DRAWN BY:
M. FORONDA
REPLACES:
D000670
DCR NUMBER:
D010319
PROD. REV.
SEE TABLE
SCALE:
None
SIZE:
A
SHEET:
1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revisions Primary AWG Color Product Dimensions
Part Names No. Range Code L Max
A2.54 (0.100)
øD1 øD2 øD3
D-150-0168 A 1 26-20 Red 80.52 (3.170) 50.30 (1.970) 3.00 (0.118) 1.14 (0.045) 2.79 (0.110)
D-150-0169 B 1 20-16 Blue 80.52 (3.170) 50.30 (1.970) 4.00 (0.157) 1.63 (0.064) 4.00 (0.157)
D-150-0170 B 1 16-12 Yellow 80.52 (3.170) 50.30 (1.970) 5.00 (0.197) 2.46 (0.097) 4.32 (0.170)
D-150-0174 A 2 26-20 Red 105.92 (4.170) 74.93 (2.950) 4.00 (0.157) 1.14 (0.045) 2.16 (0.085)
D-150-0175 D 2 18-16 Blue 105.92 (4.170) 74.93 (2.950) 5.00 (0.197) 1.63 (0.064) 2.79 (0.110)
D-150-0176 B 2 14 Yellow 105.92 (4.170) 74.93 (2.950) 6.00 (0.236) 2.46 (0.097) 4.32 (0.170)
D-150-0177 B 2 12 Yellow 105.92 (4.170) 74.93 (2.950) 9.04 (0.356) 2.46 (0.097) 4.32 (0.170)
D-150-0178 A 3/4 26-20 Red 105.92 (4.170) 74.93 (2.950) 4.00 (0.157) 1.14 (0.045) 2.16 (0.085)
D-150-0179 A 3/4 22-20 Red 105.92 (4.170) 74.93 (2.950) 5.00 (0.197) 1.14 (0.045) 2.16 (0.085)
D-150-0180 A 3/4 18-16 Blue 105.92 (4.170) 74.93 (2.950) 6.00 (0.236) 1.63 (0.064) 2.79 (0.110)
D-150-0181 B 3/4 14-12 Yellow 105.92 (4.170) 74.93 (2.950) 9.04 (0.356) 2.46 (0.097) 4.32 (0.170)
MATERIALS
1. SOLDERSHIELD SPLICE SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve,
containing two environment resistant sealing rings and a solder impregnated, flux-coated copper-wire braid.
Transparent blue.
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROM1 per ANSI J-STD-004.
2. CRIMP SPLICE (1, 2, OR 4 PER KIT): Tin-plated copper alloy with color code stripe.
3. SEALING SPLICE SLEEVE (1, 2, OR 4 PER KIT): Heat-shrinkable, radiation cross-linked modified polyvinylidene
fluoride sleeve, containing two environment resistant sealing rings. Transparent blue.
APPLICATION
1. These kits are designed to make an environment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad
cables having tin or silver-plated conductors and insulations rated for 135C minimum.
2. Temperature rating: -55C to +150C.
3. For installation procedures refer to the applicable sections of Raychem Process Standard RCPS 150-02.
