DATA SHEET
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
PHOTOCOUPLER
PS9115
HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE
5-PIN SOP (SO-5) PHOTOCOUPLER
NEPOC Series
Document No. PN10267EJ05V0DS (5th edition)
Date Published March 2008 NS
Printed in Japan
2003, 2008
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
DESCRIPTION
The PS9115 is an optically coupled high-speed, totem pole output isolator containing a GaAlAs LED on the input
side and a photodiode and a signal processing circuit on the output side on one chip.
The PS9115 is specified high CMR, high CTR and pulse width distortion with operating temperature.
FEATURES
High common mode transient immunity (CMH, CML = ±20 kV/
μ
s TYP.)
Small package (SO-5)
Pulse width distortion (t
PHL tPLH = 7 ns TYP.)
High-speed (10 Mbps)
High isolation voltage (BV = 3 750 Vr.m.s.)
Totem pole output
Ordering number of taping product: PS9115-F3, F4: 2 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved No. 40008902 (Option)
APPLICATIONS
• Measurement equipment
• PDP
Line Receiver for FA Network
TRUTH TABLE
LED Output
ON L
OFF H
1. Anode
2. Cathode
3. GND
4. V
O
5. V
CC
PIN CONNECTION
(Top View)
53
12
4
Data Sheet PN10267EJ05V0DS
2
PS9115
PACKAGE DIMENSIONS (UNIT: mm)
1.27
0.4
+0.10
–0.05
0.25 M
0.1±0.1
2.6±0.2
4.4
7.0±0.3
0.5±0.3
0.15
+0.10
–0.05
3.4
+0.3
–0.1
53
12
4
MARKING EXAMPLE
No. 1 pin Mark
Initial of NEC
(Engraved mark)
Rank Code
Year Assembled
(Last 1 Digit)
Week Assembled
N
8
31
9115
N831
N
*1
*1 Bar : Pb-Free
Type Number
Assembly Lot
No. 1 pin Mark
Initial of NEC
(Engraved mark)
Rank Code
Year Assembled
(Last 1 Digit)
Week Assembled
N
8
31
9115
N831
N
*1
*1 Bar : Pb-Free
Type Number
Assembly Lot
SnBi PLATING Ni/Pd/Au PLATING
<R>
<R>
Data Sheet PN10267EJ05V0DS
3
PS9115
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification
Packing Style Safety Standard
Approval
Application Part
Number
*1
PS9115 PS9115-A Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS9115
PS9115-F3 PS9115-F3-A (SnBi) Embossed Tape 2 500 pcs/reel (UL approved)
PS9115-F4 PS9115-F4-A
PS9115-V PS9115-V-A 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2
PS9115-V-F3 PS9115-V-F3-A Embossed Tape 2 500 pcs/reel (VDE0884 Part2)
PS9115-V-F4 PS9115-V-F4-A Approved (Option)
PS9115 PS9115-AX Pb-Free 20 pcs (Tape 20 pcs cut) Standard products
PS9115-F3 PS9115-F3-AX (Ni/Pd/Au) Embossed Tape 2 500 pcs/reel (UL approved)
PS9115-F4 PS9115-F4-AX
PS9115-V PS9115-V-AX 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2
PS9115-V-F3 PS9115-V-F3-AX Embossed Tape 2 500 pcs/reel (VDE0884 Part2)
PS9115-V-F4 PS9115-V-F4-AX Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current
*1
IF 30 mA
Reverse Voltage VR 5 V
Detector
Supply Voltage VCC 7 V
Output Voltage VO 7 V
High Level Output Current IOH 5 mA
Low Level Output Current IOL 13 mA
Power Dissipation
*2
PC 130 mW
Isolation Voltage
*3
BV 3 750 Vr.m.s.
Operating Ambient Temperature TA 40 to +85 °C
Storage Temperature Tstg 55 to +125 °C
*1 Reduced to 0.3 mA/°C at T
A = 25°C or more.
*2 T
A = 40 to +85°C, Applies to output pin VO and power supply pin VCC. Reduced to 2.36 mW/°C at TA = 70°C or
more.
*3 AC voltage for 1 minute at T
A = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-5 shorted together.
<R>

PS9115-AX

Mfr. #:
Manufacturer:
CEL
Description:
High Speed Optocouplers Digital Fast HI V Couplr NL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet