VIPer53 - E Electrical data
3/36
1 Electrical data
1.1 Maximum rating
Stressing the device above the rating listed in the “Absolute Maximum Ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
1.2 Thermal data
Table 1. Absolute maximum rating
Symbol Parameter Value Unit
V
DS
Continuous drain source voltage (T
J
= 25 ... 125°C)
(1)
-0.3 ... 620 V
I
D
Continuous drain current Internally limited A
V
DD
Supply voltage 0 ... 19 V
V
OSC
OSC input voltage range
0 ... V
DD
V
I
COMP
I
TOVL
COMP and TOVL input current range
(1)
1. In order to improve the ruggedness of the device versus eventual drain overvoltages, a resistance of 1kΩ
should be inserted in series with the TOVL pin.\
-2 ... 2 mA
V
ESD
Electrostatic discharge:
Machine model (R = 0Ω; C = 200pF)
Charged device model
200
1.5
V
kV
T
J
Junction operating temperature Internally limited °C
T
C
Case operating temperature -40 to 150 °C
T
STG
Storage temperature -55 to 150 °C
Table 2. Thermal data
Symbol Parameter
PowerSO-10
(1)
1. When mounted on a standard single-sided FR4 board with 50mm² of Cu (at least 35 mm thick) connected
to the DRAIN pin.
DIP-8
(2)
2. When mounted on a standard single-sided FR4 board with 50mm² of Cu (at least 35 mm thick) connected
to the device tab.
Unit
R
thJC
Thermal Resistance Junction-case Max 2 20 °C/W
R
thJA
Thermal Resistance Ambient-case Max 60 80 ° C/W