OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TMR 3-4822WIR

P1-P3
www.tracopower.com Page 1 of 3
DC/DC Converter TMR 3WIR Series, 3 Watt
Models
• Compact SIP-8 metal case
• EN 50155 railway approval
• Ultra wide 4:1 Input: 9–36,
18–75 and 43–160 VDC
• I/O-isolation 3‘000 VDC
• Fully regulated outputs
• Operating temperature range
–40°C to +90°C
• Short circuit protection and
current limitation
• Remote On/Off
• 3-year product warranty
The TMR 3WIR series is a set of 3 Watt DC/DC converters in a SIP-8 metal case.
They operate up to 78°C environment temperature at full load and up to 90°C
with a 50% load derating. With EN 50155 and UL 60950-1 certification, 3’000
VDC I/O-isolation voltage, external On/Off, current limitation and short current
protection they cover a wide range of application when space is limited. The
input of the converters is designed for a wide voltage range (4:1) and minimum
load is not required.
Order code Input voltage Output voltage Output current max. Efficiency typ.
TMR 3-2410WIR
3.3 VDC 700 mA 76 %
TMR 3-2411WIR
5.0 VDC 600 mA 81 %
TMR 3-2419WIR
9.0 VDC 333 mA 81 %
TMR 3-2412WIR
9 – 36 VDC
12 VDC 250 mA 83 %
TMR 3-2413WIR
(24 VDC nominal)
15 VDC 200 mA 83 %
TMR 3-2415WIR
24 VDC 125 mA 82 %
TMR 3-2421WIR
±5 VDC ±300 mA 80 %
TMR 3-2422WIR
±12 VDC ±125 mA 82 %
TMR 3-2423WIR
±15 VDC ±100 mA 82 %
TMR 3-4810WIR
3.3 VDC 700 mA 75 %
TMR 3-4811WIR
5.0 VDC 600 mA 81 %
TMR 3-4819WIR
9.0 VDC 333 mA 81 %
TMR 3-4812WIR
18 – 75 VDC
12 VDC 250 mA 82 %
TMR 3-4813WIR
(48 VDC nominal)
15 VDC 200 mA 82 %
TMR 3-4815WIR
24 VDC 125 mA 82 %
TMR 3-4821WIR
±5 VDC ±300 mA 80 %
TMR 3-4822WIR
±12 VDC ±125 mA 82 %
TMR 3-4823WIR
±15 VDC ±100 mA 82 %
TMR 3-7210WIR
3.3 VDC 700 mA 76 %
TMR 3-7211WIR
5.0 VDC 600 mA 80 %
TMR 3-7219WIR
9.0 VDC 333 mA 81 %
TMR 3-7212WIR
43 – 160 VDC
12 VDC 250 mA 82 %
TMR 3-7213WIR
(110 VDC nominal)
15 VDC 200 mA 83 %
TMR 3-7215WIR
24 VDC 125 mA 83 %
TMR 3-7221WIR
±5 VDC ±300 mA 80 %
TMR 3-7222WIR
±12 VDC ±125 mA 83 %
TMR 3-7223WIR
±15 VDC ±100 mA 81 %
Models
TMR 3WIR Series, 3 Watt
www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current no load 24 Vin models: 4 mA typ
48 Vin models: 4 mA typ.
110 Vin models: 2 mA typ.
Surge voltage (1 s max.) 24 Vin models: 50 V max.
48 Vin models: 100 V max.
110 Vin models: 185 V max.
EMC emissions – Conducted & Radiated input suppression
EN 55011, EN 55032 class A or B (with ext. filter)
–
Application note for filter class A/B proposal
www.tracopower.com/overview/tmr3wir
EMC immunity – ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,
perf. criteria A
– Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A
– Fast transient / surge EN 61000-4-4, ±2 kV, perf. criteria A
(with external input capacitor / diode) EN 61000-4-5, ±2 kV perf. criteria A
24 Vin models: Nippon chemi-con KY 220 µF / 100 V and
TVS (SMDJ70A, 70 V, 3000 W) in parallel
48 Vin models: Nippon chemi-con KY 220 µF / 100 V and
TVS (SMDJ120A, 120 V, 3000 W) in parallel
110 Vin models: Nippon chemi-con KY 150 µF / 200 V and
TVS (SMBJ250A, 250 V, 600 W) in parallel
– Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A
– Magnetic field immunity EN 61000-4-8
100 A/m, continuous, perf. criteria A
1000 A/m, 1 sec., perf. criteria A
Input filter capacitor type
Recommended input fuse 24 Vin models: 0.8 A (slow blow)
48 Vin models: 0.5 A (slow blow)
110 Vin models: 0.16 A (slow blow)
Output Specifications
Voltage set accuracy ±1 % max.
Regulation – Input variation (Vin min. to Vin max.) 0.2 % max.
– Load variation (0 – 100 %) single output: 0.5 % max.
dual output: 1 % max.
– Cross regulation dual output: 5 % max. (asymmetrical load 25 % / 100 %)
Temperature coefficient ±0.02 %/K max.
Minimum load not required
Ripple and noise (20 MHz Bandwidth with 1 µF / 50 V) 75 mVp-p max.
Start up time (constant resistive load) 75 ms max.
Transient response – Recovery time (25% load step change) 250 µs typ.
Current limitation 180 % of Iout nom. typ. (hiccup)
Short circuit protection continuous, automatic recovery
Capacitive load – Single output 3.3 VDC models: 1100 µF max.
5.0 VDC models: 550 µF max.
9.0 VDC models: 340 µF max.
12 & 15 VDC models: 240 µF max.
24 VDC models: 90 µF max.
– Dual output ±5 VDC models: 340 µF max. (each output)
±12 VDC models: 170 µF max. (each output)
+15 VDC models: 90 µF max. (each output)
General Specifications
Temperature ranges – Operating (natural convection: 20 LFM, 0.1m/s) –40°C to +90°C
– Case temperature +100°C max.
– Storage temperature –55°C to +125°C
Derating 4.5 %/K above 78°C
Humidity (non condensing) 5 – 95 % rel H max.
TMR 3WIR Series, 3 Watt
www.tracopower.com
© Copyright 2018 Traco Electronic AG Specifications can be changed without notice!
Page 3 of 3
Rev. May 28. 2018
General Specifications
Isolation voltage (60 s) – Input to output isolation voltage 3’000 VDC
– Input/output to case isolation voltage 1’500 VDC
Isolation capacitance 100 pF max.
Isolation resistance (at 500 VDC) >1 GOhm
Thermal Shock acc. MIL-STD-810F
Shock & Vibration acc. EN 61373, MIL-STD-810F
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 5‘535‘000 h
Switching frequency 24 & 48 Vin models: 400 kHz (±40 kHz) (pulse width modulation)
110 Vin models: 300 kHz (±30 kHz) (pulse width modulation)
Safety standards IEC/EN/UL 60950-1, EN 50155
– Certification documents www.tracopower.com/overview/tmr3wir
Remote On/Off – On: open circuit or high impedance
– Off: 2 – 4 mA current applied via 1kOhm resistor
– Off idle current: 2.5 mA max.
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS RoHS directive 2011/65/EU
– Flamability identified acc. EN 45545-2
www.tracopower.com/info/en45545-declaration.pdf
Physical Specifications
Casing material copper
Potting material silicone (UL94 V-0 rated)
Package weight 5.9 g (0.21 oz)
Outline Dimensions
Pin Single Dual
1
–Vin (GND) –Vin (GND)
2
+Vin (Vcc) +Vin (Vcc)
3
On/Off On/Off
6
+Vout +Vout
7
–Vout Common
8
NC –Vout
9, 10
Case Case
Pin-Out
Dimensions in [mm], () = Inch
Tolerances: x.x ±0.5 (±0.02)
x.xx ±0.25 (±0.01)
Pin pitch tolerance ±0.25 (±0.01)
Pin dimension tolerance ±0.1 (±0.004)
Supporting Documents: www.tracopower.com/overview/tmr3wir
11.2 (0.44)4.1
(0.16)
21.8 (0.86)
2 x 2.542 x 2.542.0
7.62
(0.08)
(2 x 0.1) (0.3) (2 x 0.1)
0.25 (0.01)
9.6 (0.38)
0.5 (0.02)
3.3
(0.13)
bottom view
1 2 3 6 7 8
9
10
10.6 (0.42)
1.0 (0.04)
0.6 (0.02)
3.5
(0.14)
case pins *
1.0 (0.04)
2.5 (0.10)
t = 0.3 (0.012)
.
* Case pins should not be connected to any circuit
P1-P3

TMR 3-4822WIR

Mfr. #:
Buy TMR 3-4822WIR
Manufacturer:
TRACO Power
Description:
Isolated DC/DC Converters 3W 18-75Vin +/-12V +/-125mA SIP Iso Reg
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet