Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
4.5 Vdc - 13.8 Vdc Input 0.591 Vdc - 5.1 Vdc/20 A Output
Apr. 16, 2010 Bel Power Inc., a subsidiary of Bel Fuse Inc.
• Non-Isolated • Wide Output Trim Range
• High Efficiency • Output Over-Voltage Shutdown
• Fixed Switching Frequency • OCP/SCP
• Low Cost • Low Output Ripple
• Excellent Thermal Performance • Power Good Signal
• Wide Input Voltage Range • Remote On/Off
Description
The xRP1-20E1A0 is a non-isolated dc/dc converter that operates over a wide range of input voltage (Vin = 4.5
Vdc ~ 13.8 Vdc). This unit can provide a precisely regulated output voltage from 0.591 Vdc to 5.1 Vdc and can
deliver up to 20 A of output current. This unit is designed to be highly efficient and low cost. The converter is
provided in an industry standard package.
Part Selection
Output Voltage Input Voltage Max. Output
Current
Max. Output
Power
Typical Efficiency
(Vo=5.0 Vdc)
Model Number
Active High
0.591 Vdc - 5.1 Vdc 4.5 Vdc - 13.8 Vdc 20 A 100 W 94% VRP1-20E1A0
0.591 Vdc - 5.1 Vdc 4.5 Vdc - 13.8 Vdc 20 A 100 W 94% 0RP1-20E1A0
Notes: 1. The part number first letter “V” indicate Vertical mount and “0” indicate Horizontal mount.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
3. Add “G” suffix at the end of the model numbers listed above to indicate “Tray Packaging”.
Absolute Maximum Ratings
Parameter Min Typ Max Notes
Input Voltage (continuous) -0.3 V - 15 V
Output Enable Terminal Voltage -0.3 V - 15 V
Ambient Temperature
0 °C
-
70 °C
Storage Temperature
-40 °C
-
125 °C
Input Specifications
Parameter Min Typ Max Notes
Input Voltage
Vo﹤ 3.45 V
Vo ≥ 3.45 V
4.5 V
1.3*Vo
12 V
12 V
13.8 V
13.8 V
Input Current (full load) - - 20 A
An input line fuse must always be
used.
Input Current (No load) - 150 mA 300 mA
Remote Off Input Current - 50 mA -
Input Reflected Ripple Current (pk-pk) - 50 mA 100 mA
Input Reflected Ripple Current (rms) - 20 mA 40 mA
Use a 1000uF AL-Cap on the input.
I
2
t Inrush Current Transient - - 1 A
2
s
Turn-on Voltage Threshold - 4.2 V -
Turn-off Voltage Threshold - 3.9 V -
A 30.1K resistor is connected from
Enable to Vin
Note: All specifications are typical at 25 °C unless otherwise stated.
xRP1-20E1A0 RoHS Com
liant Rev. I