General Description
The DS12885, DS12887, and DS12C887 real-time
clocks (RTCs) are designed to be direct replacements
for the DS1285 and DS1287. The devices provide a
real-time clock/calendar, one time-of-day alarm, three
maskable interrupts with a common interrupt output, a
programmable square wave, and 114 bytes of battery-
backed static RAM (113 bytes in the DS12C887 and
DS12C887A). The DS12887 integrates a quartz crystal
and lithium energy source into a 24-pin encapsulated
DIP package. The DS12C887 adds a century byte at
address 32h. For all devices, the date at the end of the
month is automatically adjusted for months with fewer
than 31 days, including correction for leap years. The
devices also operate in either 24-hour or
12-hour format with an AM/PM indicator. A precision
temperature-compensated circuit monitors the status of
V
CC
. If a primary power failure is detected, the device
automatically switches to a backup supply. A lithium
coin-cell battery can be connected to the V
BAT
input
pin on the DS12885 to maintain time and date operation
when primary power is absent. The device is accessed
through a multiplexed byte-wide interface, which sup-
ports both Intel and Motorola modes.
Applications
Embedded Systems
Utility Meters
Security Systems
Network Hubs, Bridges, and Routers
Features
Drop-In Replacement for IBM AT Computer
Clock/Calendar
RTC Counts Seconds, Minutes, Hours, Day, Date,
Month, and Year with Leap Year Compensation
Through 2099
Binary or BCD Time Representation
12-Hour or 24-Hour Clock with AM and PM in
12-Hour Mode
Daylight Saving Time Option
Selectable Intel or Motorola Bus Timing
Interfaced with Software as 128 RAM Locations
14 Bytes of Clock and Control Registers
114 Bytes of General-Purpose, Battery-Backed
RAM (113 Bytes in the DS12C887 and
DS12C887A)
RAM Clear Function (DS12885, DS12887A, and
DS12C887A)
Interrupt Output with Three Independently
Maskable Interrupt Flags
Time-of-Day Alarm Once Per Second to Once
Per Day
Periodic Rates from 122μs to 500ms
End-of-Clock Update Cycle Flag
Programmable Square-Wave Output
Automatic Power-Fail Detect and Switch Circuitry
Optional 28-Pin PLCC Surface Mount Package or
32-Pin TQFP (DS12885)
Optional Encapsulated DIP (EDIP) Package with
Integrated Crystal and Battery (DS12887,
DS12887A, DS12C887, DS12C887A)
Optional Industrial Temperature Range Available
Underwriters Laboratory (UL) Recognized
DS12885/DS12887/DS12887A/DS12C887/DS12C887A
Real-Time Clocks
______________________________________________
Maxim Integrated Products
1
DS12885
DS83C520
R/W
AS
GND
X2X1
V
CC
V
CC
CRYSTAL
DS
V
BAT
AD(0–7) SQW
RESET
IRQ
RCLR
CS
MOT
Typical Operating Circuit
19-5213; Rev 4; 4/10
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Pin Configurations and Ordering Information appear at end of data sheet.
DS12885/DS12887/DS12887A/DS12C887/DS12C887A
Real-Time Clocks
2 _____________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Voltage Range on V
CC
Pin Relative to Ground .....-0.3V to +6.0V
Operating Temperature Range ...................................................
Commercial (noncondensing) .............................0°C to +70°C
Operating Temperature Range ...................................................
Industrial (noncondensing)...............................-40°C to +85°C
Storage Temperature Range
EDIP..................................................................-40°C to +85°C
PDIP, SO, PLCC, TQFP ..................................-55°C to +125°C
Lead Temperature (soldering, 10s) .................................+260°C
(Note: EDIP is hand or wave-soldered only.)
Soldering Temperature (reflow)
PDIP, SO, PLCC............................................................+260°C
TQFP .............................................................................+245°C
DC ELECTRICAL CHARACTERISTICS
(V
CC
= +4.5V to +5.5V, T
A
= over the operating range, unless otherwise noted.) (Note 2)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage V
CC
(Note 3) 4.5 5.5 V
V
BAT
Input Voltage V
BAT
(Note 3) 2.5 4.0 V
Input Logic 1 V
IH
(Note 3) 2.2
V
CC
+
0.3
V
Input Logic 0 V
IL
(Note 3) -0.3 +0.8 V
V
CC
Power-Supply Current I
CC1
(Note 4) 15 mA
V
CC
Standby Current I
CCS
(Note 5) mA
Input Leakage I
IL
-1.0 +1.0 µA
I/O Leakage I
OL
(Note 6) -1.0 +1.0 µA
Input Current I
MOT
(Note 7) -1.0 +500 µA
Output at 2.4V I
OH
(Note 3) -1.0 mA
Output at 0.4V I
OL
(Note 3) 4.0 mA
Power-Fail Voltage V
PF
(Note 3) 4.0 4.25 4.5 V
VRT Trip Point VRT
TRIP
1.3 V
DS12885/DS12887/DS12887A/DS12C887/DS12C887A
Real-Time Clocks
_____________________________________________________________________ 3
DC ELECTRICAL CHARACTERISTICS
(V
CC
= 0V, V
BAT
= 3.0V, T
A
= over the operating range, unless otherwise noted.) (Note 2)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
V
BAT
Current (OSC On);
T
A
= +25°C, V
BACKUP
= 3.0V
I
BAT
(Note 8) 500 nA
V
BAT
Current (Oscillator Off) I
BATDR
(Note 8) 100 nA
AC ELECTRICAL CHARACTERISTICS
(V
CC
= 4.5V to 5.5V, T
A
= over the operating range.) (Note 2)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Cycle Time t
CYC
385 DC ns
Pulse Width, DS Low or R/W High PW
EL
150 ns
Pulse Width, DS High or R/W Low PW
EH
125 ns
Input Rise and Fall t
R
, t
F
30 ns
R/W Hold Time t
RWH
10 ns
R/W Setup Time Before DS/E t
RWS
50 ns
Chip-Select Setup Time Before
DS or R/W
t
CS
20 ns
Chip-Select Hold Time t
CH
0ns
Read-Data Hold Time t
DHR
10 80 ns
Write-Data Hold Time t
DHW
0ns
Address Valid Time to AS Fall t
ASL
30 ns
Address Hold Time to AS Fall t
AHL
10 ns
Delay Time DS/E to AS Rise t
ASD
20 ns
Pulse Width AS High PW
ASH
60 ns
Delay Time, AS to DS/E Rise t
ASED
40 ns
Output Data Delay Time from DS
or R/W
t
DDR
20 120 ns
Data Setup Time t
DSW
100 ns
Reset Pulse Width t
RWL
s
IRQ Release from DS t
IRDS
s
IRQ Release from RESET t
IRR
s

DS12887A+

Mfr. #:
Manufacturer:
Maxim Integrated
Description:
Real Time Clock RTC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union