OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

OVM4B

P1-P3P4-P4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 05/10
Page 1 of 4
Product Photo Here
Part Number Part Number Material Emitted Color
Intensity Typ.
(mcd)
Lens Color
OVM4BTX OVM4BTXV
InGaN
Blue 2260 Clear Glass
OVM4GTX OVM4GTXV
InGaN
Green 6520 Clear Glass
OVM4RTX OVM4RTXV
AlInGaP
Red 3300 Clear Glass
OVM4YTX OVM4YTXV
AlInGaP
Yellow 2010 Clear Glass
Hi-Reliability Visible LED Lamp
(TO46)
OVM4x, OVM4xTX, OVM4xTXV
• Hermetically sealed TO-46 package
• Choice of blue, green, red or yellow
• High-brightness with well-defined spatial radiation patterns
• ESD protection built in
Each OVM4x, OVM4xTX and OVM4xTXV device is a high-reliability, high-sensitivity visible LED that is mounted
in a hermetically sealed TO-46 package.
“Hi-Reliability” Visible LEDs function in the abnormally severe levels of mechanical, environmental and electrical
stress that are typical of military and harsh industrial applications.
OVM4xTX and OVM4xTXV devices are processed to OPTEK’s 100% screening and QCI program-patterned after
MIL-PRF-19500. Group A and B are performed on every lot. Group C is performed every six months.
Applications
• Automotive exterior and interior lighting
• Architectural lighting
• Electronic signs and signals
RoHS
DO NOT LOOK DIRECTLY AT
LED WITH UNSHIELDED EYES
OR DAMAGE TO RETINA MAY
OCCUR.
ANODE
(BRAZED)
CATHODE
(ISOLATED)
Dimensions are in inches [ mm]
Pin 1 Cathode
Pin 2 Anode
Pin 2
Pin 1
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 05/10
Page 2 of 4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Absolute Maximum Ratings
T
A
= 25
o
C unless otherwise noted
Electrical Characteristics
T
A
= 25
o
C unless otherwise noted
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
Storage Temperature Range -65° C to +150° C
Operating Temperature Range -55° C to +100° C
Reverse Voltage 5 V
Continuous Forward Current
2
100 mA
Peak Forward Current (10% Duty Cycle, 1 KHz) 1.6 A
Power Dissipation 370 mW
115° C LED Junction Temperature
Lead Soldering Temperature (3mm from the case)
1
260° C
Current Linearity vs. Ambient Temperature -0.2 mA/° C
SYMBOL
PARAMETER MIN TYP MAX UNITS CONDITIONS
I
v
Luminous Intensity
Blue ---- 2260 ----
mcd I
F
= 20 mA
Green ---- 6520 ----
Red ---- 3300 ----
Yellow ---- 2010 ----
V
F
Forward Voltage
Blue
---- 2.60 2.95
V I
F
= 20 mA
Green
---- 2.60 2.95
Red
---- 1.80 2.15
Yellow
---- 1.80 2.15
λ
P
Peak Wavelength
Blue ---- 463 ----
nm I
F
= 20 mA
Green ---- 530 ----
Red ---- 630 ----
Yellow ---- 591 ----
λ
D
Dominant Wavelength
Blue 460 465 470
nm I
F
= 20 mA
Green 520 530 540
Red 619 624 629
Yellow 584 589 594
Δλ Spectral Half Width
Blue ---- 22 ----
nm I
F
= 20 mA
Green ---- 35 ----
Red ---- 15 ----
Yellow ---- 18 ----
2 Θ ½
50% Power Angle
---- 18 ---- deg I
F
= 20 mA
Hi-Reliability Visible LED Lamp
OVM4x, OVM4xTX, OVM4xTXV
Notes:
1. Solder time less than 5 seconds at temperature extreme.
2. Design of heat dissipation should be considered.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.4 05/10
Page 3 of 4
Typical Electro-Optical Characteristics Curves
Hi-Reliability Visible LED Lamp
OVM4x, OVM4xTX, OVM4xTXV
1.0
0.8
0.6
0.4
0.2
0.0
780 380 430 480 530 580 630 680 730
Wavelength (nm)
Normalized Spectral Intensity
Input Current = 100 mA, T
J
= 25° C
Wavelength Characteristics
Red
Yellow
Green
Blue
0
20
40
60
80
100
1.4 1.6 1.8 2 2.2 2.4 2.6 2.8 3 3.2 3.4 3.6
Vf (V)
If (mA)
Red
Yellow
Green
Blue
Forward Voltage vs Forward Current
Forward Voltage vs Temperature
1. 5
2.0
2.5
3.0
3.5
4.0
-100 -50 0 50 100 150 200
Temperature (Deg. C
Red
Yellow
Green
Blue
Vf (V)
0.1
1. 0
10 . 0
-75 -50 -25 0 25 50 75 100 125 150
Deg C
OVM4B
OVM4R
OVM4Y
OVM4G
Relative Intensity vs Temperature
T
A
= 25°C
I
F
= 20 mA
Spatial Intensity Distribution
Red
Yellow
Green
Blue
0
500
1000
1500
2000
2500
3000
3500
4000
0 20 406080100120
Intensity vs Forward Current
Forward Current (mA)
Intensity (mcd)
T
J
= 25° C
P1-P3P4-P4

OVM4B

Mfr. #:
Buy OVM4B
Manufacturer:
Optek / TT Electronics
Description:
Standard LEDs - Through Hole Blue, 465nm 2260mcd @ 20mA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet