NCV8660
http://onsemi.com
3
ABSOLUTE MAXIMUM RATINGS
Rating Symbol Min Max Unit
Input Voltage (IN) V
IN
−0.3 40 V
Input Current I
IN
−1.0 − mA
Output Voltage (OUT)
DC
Transient, t < 10 s (Note 1)
V
OUT
−0.3
−0.3
5.5
16
V
Output Current (OUT) I
OUT
−1.0 Current
Limited
mA
Storage Temperature Range T
STG
−55 150 °C
DT (Reset Delay Time Select) Voltage (Note 2) V
DT
−0.3 16 V
DT (Reset Delay Time Select) Current (Note 2) I
DT
−1.0 1.0 mA
RO (Reset Output) Voltage
DC
Transient, t < 10 s
V
RO
−0.3
−0.3
5.5
16
V
RO (Reset Output) Current I
RO
−1.0 1.0 mA
ESD CAPABILITY
ESD Capability, Human Body Model (Note 3)
ESD
HB
−2.0 2.0 kV
ESD Capability, Machine Model (Note 3) ESD
MM
−200 200 V
ESD Capability, Charged Device Model (Note 3) ESD
CDM
−1.0 1.0 kV
THERMAL RESISTANCE
Junction−to−Case (Note 4) DPAK 5
R
q
JC
15
°C/W
Junction−to−Ambient (Note 4) DPAK 5
R
q
JA
66 °C/W
Junction−to−Tab (Note 4) DPAK 5
R
q
JT
4.0 °C/W
Junction−to−Ambient (Note 4) SOIC−8 FUSED
R
q
JA
104 °C/W
Junction−to−Lead (pin 6) (Note 4) SOIC−8 FUSED
R
q
JT
33 °C/W
LEAD SOLDERING TEMPERATURE AND MSL
Moisture Sensitivity Level DPAK 5
SOIC−8 FUSED
MSL 1
3
−
Lead Temperature Soldering: SMD style only, Reflow (Note 5)
Pb−Free Part 60 − 150 sec above 217°C, 40 sec max at peak
SLD − 265 peak °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. The output voltage must not exceed the input voltage.
2. External resistor required to minimize current to less than 1 mA when the control voltage is above 16 V.
3. This device series incorporates ESD protection and is tested by the following methods:
ESD HBM tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD MM tested per AEC−Q100−003 (EIA/JESD22−A115)
ESD CDM tested per EIA/JESD22/C101, Field Induced Charge Model
4. Values represented typical steady−state thermal performance on 1 oz. copper FR4 PCB with 1 in
2
copper area.
5. Per IPC / JEDEC J−STD−020C.
OPERATING RANGE
Pin Symbol, Parameter Symbol Min Max Unit
V
IN
, Input Voltage Operating Range V
IN
4.5 40 V
Junction Temperature Range T
J
−40 150 °C