Specifications subject to change without notice
A Fine Technology Group
Subracks - VectorPak
®
T-Struts
Vector T-Struts can be used for custom assemblies or to fit
existing cage assemblies. Available with three nut slots.
As an alternative, mounting brackets (BR16A, available
separately) may be used to attach struts to cages. Strut
material is aluminum with clear anodized finish. Struts are
attached to side panels with 10-32 screws (Part No. HD90).
Figures showing T-Strut features - see table
T-Struts
Hardware Kit - HD34
HD34 is a complete connector mounting kit consisting of:
42, 4-40 screws (SC4-28)
42 nuts (NT4-2)
42 lockwashers
To mount connectors, simply slide nut into desired position and fasten with
screws and lockwasher as illustrated. SC4-28 screws available in bulk
quantities.
BR16A Bracket Kitincludes two each BR16-1 (right) and
BR16-2 (left) brackets plus installation hardware. Bracket
assemblies are normally used on rear strut, though front strut
may use them as well. HD90 Self-tapping Screws (pkg. 12 not
shown) may also be used to mount T-struts to sidewalls.
End
Part No.
TS81
TS81-5/90
TS169
TS169A
TSW169
TS169-6/90
TS209
TS300
TS300A
TSW300
TS600
Width
1”
1”
1”
1”
1.75”
1”
1”
1”
1”
1.75”
1.75”
Method of Fastening
BR16 Brackets or HD90 Screws
BR16 Brackets or HD90 Screws
BR16 Brackets or HD90 Screws
BR16 Brackets or HD90 Screws
HD90 Screws
HD90 Screws
BR16 Brackets or HD90 Screws
Raw Stock
Raw Stock
Raw Stock
Raw Stock/pkg.
Fig.
1
4
1
2
5
4
1
1
2
5
3
Description
1” wide T-strut, Pk. of 1 each
1” wide T-strut, Pk. of 1 each
1” wide T-strut, Pk. of 1 each
1” wide T-strut, Pk. of 1 each
1.75” wide T-strut, Pk. of 1 each
1” wide T-strut, Pk. of 1 each, dimpled
for Snap-in guide insertion
1” wide T-strut, Pk. of 1 each
1” wide T-strut, Pk. of 1 each
1” wide T-strut, Pk. of 1 each
1.75” wide T-strut, Pk. of 1 each
1.75” wide T-strut, Pk. of 4 pcs.
Length
8.12”
8.12”
16.85”
16.85”
16.85”
16.85”
20.85”
30.00”
30.00”
30.00”
60.00”
T-Struts
NT4-7PA: Pkg 25 nuts in a plastic carrier
for rapid loading into TS series middle groove
Custom lengths available on request
