OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MAL212380479

P1-P3P4-P6P7-P9P10-P12
123 SAL-A
www.vishay.com
Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15
10
Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EQUIVALENT SERIES RESISTANCE (ESR)
Fig. 27 - Typical ESR as a function of ambient temperature Fig. 28 - Typical ESR as a function of ambient temperature
Table 3
ESR
(Ω)
10
2
10
1
10
-1
10
-2
10
6
10
5
10
4
10
3
10
2
10
f (Hz)
1
1
2
3
4
Case Ø D x L = 9.4 x 23.3 mm
Curve 1: 68 µF, 35 and 40 V
Curve 2: 150 µF, 25 V
Curve 3: 330 µF, 10 V
Curve 4: 470 µF, 10 V
ESR at 100 Hz
ESR
(Ω)
10
2
10
1
10
-1
10
-2
10
6
10
5
10
4
10
3
10
2
10
f (Hz)
1
1
2
3
4
5
Case Ø D x L = 9.4 x 23.3 mm
Curve 1: 100 µF, 35 and 40 V
Curve 2: 150 µF, 35 V
Curve 3: 220 µF, 25 V
Curve 4: 470 µF, 16 V
Curve 5: 680 µF, 10 V; 1000 µF, 6.3 V
ESR at 100 Hz
TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
(quick reference)
REQUIREMENTS
NAME OF TEST REFERENCE
Endurance
IEC 60384-4/
EN130300
subclause 4.13
T
amb
= 125 °C;
U
R
= 6.3 V to 25 V with U
R
applied;
U
R
= 35 V and 40 V with U
C
applied;
10 000 h
C/C: ± 10 %
tan 1.2 x spec. limit
Z 1.2 x spec. limit
I
L5
spec. limit
Useful life
CECC 30302
subclause 1.8.1
T
amb
= 125 °C; I
R
applied and
U
R
= 6.3 V to 25 V with U
R
applied;
U
R
= 35 V and 40 V with U
C
applied;
20 000 h
C/C: ± 15 %
tan 1.5 x spec. limit
Z 1.5 x spec. limit
I
L5
spec. limit
no short or open circuit,
no visible damage
total failure percentage: < 1 %
Shelf life
(storage at high
temperature)
IEC 60384-4/
EN130300
subclause 4.17
T
amb
= 125 °C; no voltage applied;
500 h
C/C: ± 10 %
tan 1.2 x spec. limit
I
L5
1 x spec. limit
Charge and
discharge
IEC 60384-4-2
subclause 9.21
10
6
cycles without series resistance:
0.5 s to U
R
;
0.5 s to ground
C/C: ± 5 %
no short or open circuit,
no visible damage
Shock
IEC 60068-2-27
test Ea
Half-sine or saw tooth pulse shape; 50 g; 11 ms;
3 successive shocks in each direction of
3 mutually perpendicular axes;
no voltage applied
no intermittent contacts
no breakdown
no open circuiting
no mechanical damage
C/C: ± 5 %
tan 1.2 x spec. limit
Z 1.2 x spec. limit
I
L5
1.5 x spec. limit
Severe rapid change
of temperature
100 cycles of 1 h duration, each with
30 min at - 40 °C and + 125 °C
C/C: ± 25 %
tan 1.5 x spec. limit
Z 2.0 x spec. limit
I
L5
1 x spec.limit
Solvent resistance
IEC 60068-2-45,
test XA
IEC 60653
Immersion:
5 min ± 0.5 min with or without ultrasonic
at 55 °C ± 5 °C
Solvents: demineralized water and/or calgonite
solution (20 g/l)
Visual appearance not affected
Passive flammability IEC 60695-2-2
Capacitor mounted to a vertical printed-circuit
board, one flame on capacitor body;
T
amb
= 20 °C to 25 °C;
test duration = 20 s
After removing the test flame from the
capacitor, the capacitor must not
continue to burn for more than 15 s;
no burning particles must drop from
the sample
123 SAL-A
www.vishay.com
Vishay BCcomponents
End of Life. Last Available Purchase Date is 30-December-2015
Revision: 14-Aug-15
11
Document Number: 28355
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ADDITIONAL TESTS AND REQUIREMENTS FOR EPOXY-FILLED VERSIONS SAL-AG
2281 123 8.... Form BA ± 10 %, level S, lead (Pb)-free
2222 123 8.... Form BA ± 10 %, level S, non lead (Pb)-free
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE REQUIREMENTS
Severe vibration tests in accordance with “IEC 60068-2-6” and “MIL STD-202”, method 204, letter E, with the following details and
additions
Method of mounting: Clamping both body and leads
C/C: ± 10 %
tan 1.2 x stated limit
Z 1.4 x stated limit
DC leakage current: stated limit
no intermittent contacts
no indication of breakdown
no open circuiting
no evidence of mechanical damage
Severity 1 Frequency range temperature 10 Hz to 3000 Hz;
20 °C to 25 °C
Severity 2 Frequency range temperature 50 Hz to 2000 Hz; 125 °C
Severity 1 and 2 vibration amplitude: 50 g or 3.5 mm, whichever is less
Direction and duration of motion:
Severity 1 1 octave/min; 3 directions (mutually perpendicular);
20 sweeps per direction (total 60 sweeps or 18 h)
Severity 2 1 octave/min; 2 directions (longitudinal and transversal);
3 sweeps per direction (total 6 sweeps or 1 h)
Functioning:
Severity 1 Rated voltage applied
Severity 2 No voltage applied
Typical capability > 80 g at 10 Hz to 3000 Hz (also at 125 °C)
Severe shock tests in accordance with “IEC 60068-2-27” and “MIL STD-202”, method 213, letter F, with the following details and
additions
Method of mounting Clamping both body and leads
C/C: ± 10 %
tan 1.2 x stated limit
Z 1.4 x stated limit
DC leakage current: stated limit
no intermittent contacts
no indication of breakdown
no open circuiting
no evidence of mechanical damage
Pulse shape: Half-sine or sawtooth
Severity 1 1500 g; 0.5 ms (“MIL STD-202”, method 213, letter F)
Severity 2 3000 g; 0.2 ms
Severity 3 10 000 g; 0.1 ms
Direction and number of shocks:
Severity 1 and 2 3 successive shocks in each direction of 3 mutually
perpendicular axes (total 18 shocks)
Severity 3 1 shock in any direction
Functioning Rated voltage applied
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 02-Oct-12
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
P1-P3P4-P6P7-P9P10-P12

MAL212380479

Mfr. #:
Buy MAL212380479
Manufacturer:
Description:
Aluminum Electrolytic Capacitors - Axial Leaded 47uF 35V 9,4x23,3mm 125 C 20000h
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet