LE88010BQC

Document ID# 081198 Date: Mar 4, 2011
Rev: B Version: 3
Distribution: Public Document
Product Brief
VE880 Series
Single Channel VoicePort™ SLAC™ Device
Le88010
APPLICATIONS
Voice Enabled DSL Modems
Voice over IP/ATM
Integrated Access Devices (IAD)
Smart Residential Gateways (SRG) and Routers
Set-Top Box with PSTN Line Interface
PBX trunk interface
FXO interfaces
FEATURES
In combination with a DAA, provides a complete phone
line termination-to-digital interface solution
Fully programmable SLAC™ device
Disconnect, Ringing signal, Line-in-use and Line
polarity detection,
Line supervision for parallel devices connecting to
subscriber line
Small footprint package - 44-pin QFN
Minimal external discrete components required
Compatible with solid state or transformer DAA
interfaces
High speed, pin selectable PCM/MPI or GCI interface
Microprocessor interface
GCI interface option
Programmability
Two-wire AC impedance
Input/Output mode selection for one relay driver and
five general purpose digital I/O pins.
Adapts to all ringing frequencies
Disconnect, line polarity and line-in-use thresholds
DTMF tone generators
Dial pulse and DTMF cadence
Special feature support
DTMF tones
Dial pulses
Caller ID pass-through
Numeric address signaling
On hook transmission
Integrated 150 mW 3-V or 5-V Relay Driver
Supports lifeline POTS in DSL IAD applications
ORDERING INFORMATION
*Green package meets RoHS Directive 2002/95/EC of the European
Council to minimize the environmental impact of electrical equipment.
Device Package
Le88010BQC 44-pin QFN (Green package)*
DESCRIPTION
The Zarlink Le88010 VoicePort™ SLAC™ device, in
combination with an analog DAA, implements all the voice
functions necessary to properly terminate and monitor the
customer premises side of a PSTN line and provide linear or
G.711 A- or u-Law encoded voice output over a standard PCM
or GCI highway. The Le88010 device is ideal for use in voice
enabled DSL modems that implement lifeline POTS and
support PBX functionality.
This device reduces system level cost, space, and power by
achieving a high level of voice integration and adds
programmability of transmission and signalling features.
Designers benefit by having a simple, cost effective, low power
and dense, interface design without sacrificing features or
functionality.
LE88010 VOICEPORT™ SLAC™ DEVICE
BLOCK DIAGRAM
PCLK/DCL
DRA/DD
DXA/DU
FS/FSC
DOUT
TDC
RST
DCLK/S0
DIN/S1
INT/S2
RDC
IREF
VREF
Microprocessor
Interface
(MPI)
PLL
Analog
Reference
PCM Interface
and Time Slot
Assigner
DTMF and
Dial Pulse
Generation
Voice Signal
Processing
Supervision
Processing
VOUTP
VOUTN
VINP
VINN
LTP
ITR
GCI Interface
CS/PG
Input /
Output
I/O1 - I/O6
6
2
Zarlink Semiconductor Inc.
Le88010 Product Brief
Related Literature and Supporting Collateral
081201-Le88010 VoicePort™ SLAC™ Device Data Sheet*
Le71HR0823 - VE880 Series Line Module supporting 1FXS and 1FXO
Up to 150-V ringing with a 12-V Flyback Tracking Power Supply
Le71HK002 - Universal VoicePath™ Development / Demo Platform
Le71SK002 - VoicePath™ API-II Software System
*Contact your Zarlink Sales Representative to obtain the data sheet.
Packaging and Availability
See Ordering Information on first page.
For More Information
To find the Zarlink Sales Office nearest you, visit our website at: www.zarlink.com.
FEATURES BENEFITS
• Seamless and compatible interface with solid state or
transformer DAA
• Provides complete design flexibility to choose optimal
DAA solution for target market
• Highly programmable
Enables designer complete control over transmission and
signalling features
• Highest level of integration • Reduces system level cost and board space
• Comprehensive line monitoring
Enables supervision functions such as disconnect, ringing
signal detection, line-in-use, line polarity detection, and
parallel phone off hook
• Dial pulse generation with cadence and DTMF tones • Reduces real-time software overhead
• Small footprint, 44-pin QFN
• Reduces board space requirement with small form factor
7x7 mm square QFN package
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively “Zarlink”) is believed to be reliable.
However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such
information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or
use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual
property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in
certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink.
This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part
of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other
information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the
capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute
any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and
suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does
not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in
significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink’s conditions of sale which are available on request.
Purchase of Zarlink’s I
2C components conveys a license under the Philips I2C Patent rights to use these components in an I2C System, provided that the system
conforms to the I
2C Standard Specification as defined by Philips.
Zarlink, ZL, the Zarlink Semiconductor logo and the Legerity logo and combinations thereof, VoiceEdge, VoicePort, SLAC, ISLIC, ISLAC and VoicePath are
trademarks of Zarlink Semiconductor Inc.
TECHNICAL DOCUMENTATION - NOT FOR RESALE
For more information about all Zarlink products
visit our Web Site at

LE88010BQC

Mfr. #:
Manufacturer:
Microchip / Microsemi
Description:
Telecom Interface ICs 1CH FXO Codec, 3V, QFN44
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet