Dimensions are shown for reference Dimensions are in inches and Specifications subject to change. Technical Support Center
purposes only. millimeters unless otherwise 1-800-522-6752
specified. Values in brackets are www.amp.com
metric equivalents.
Dimensions are shown for reference Dimensions are in inches and Specifications subject to change. Technical Support Center
purposes only. millimeters unless otherwise 1-800-522-6752
specified. Values in brackets are www.amp.com
metric equivalents.
Product Facts
■ Bonded insulation
■ Abbreviated copper support
sleeve (does not extend
beyond end of wire barrel)
■ Special insulation colors
■ Designed with signal in
mind
■ Designed not to slip or fall
off due to heat cycling or
vibration
■ Fast accurate product and
wire identification
■ Low profile
■ Meets the requirements of
AAR (Association of
American Railroads signal
manual)
■ Accommodates wire
gauges 20 AWG through
10 AWG
Standard Terminals and Splices
Catalog 82042
Revised 8-00
PLASTI-BOND
57
Table of Contents
Terminals
Ring Tongue and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Basic Terminal Material. The
basic terminal is constructed of fine
grade high conductivity copper per
ASTM B-152 and tin-plated per
ASTM B-545. AMP’s special plating
process creates durable corrosion
resistance to salt spray and most
chemical fumes.
Inner Bonding Sleeve.
Insulation is bonded to an
ASTM B-152 copper sleeve.
Serrations.
Serrations inside barrel provide
maximum contact and tensile
strength after crimping.
Insulation. Vinyl insulation extends
beyond terminal barrel to prevent
exposure of conductor during
stress and vibration. Insulated
sleeve provides circumferential
support to the wire and allows the
wire to be bent in any direction,
without fraying the wire’s insulation
or breaking the conductor.
Temperature Rating: 85°C Max.