Data brief
For further information contact your local STMicroelectronics sales office.
December 2010 Doc ID 18314 Rev 1 1/4
4
STEVAL-MKI036V1
MEMS analog-output demonstration board based on the
LPY503AL ±30°/s and ±120°/s, dual-axis pitch and yaw gyroscope
Features
■ Two different working modes:
– analog (AWM)
– digital (DWM)
■ RoHS compliant
Description
The STEVAL-MKI036V1 demonstration board is
designed to provide the user with a complete,
ready-to-use platform for demonstration of the
LPY503AL product family.
The STEVAL-MKI036V1 includes a sensing
element and an IC interface capable of translating
information from the sensing element into a
measured signal that can be used for external
applications.
In addition to the MEMS sensor, the
demonstration board uses an ST7 microcontroller
which functions as a bridge between the sensor
and the PC. This makes it possible to download
the graphical user interface (GUI) from the
website or to use dedicated software routines for
customized applications.
The STEVAL-MKI036V1 demonstration board has
been designed for use in two different working
modes: analog and digital.
In analog mode (AWM) the microcontroller on the
board is disabled and the analog outputs of the
device are available to the user on a dedicated
connector. This is the default working mode when
the power supply is applied either through the
USB connector or through the supply connector.
In digital mode (DWM) the microcontroller on the
board is enabled and it allows the user to digitally
acquire the output signals of the device, to view
them on the PC through the dedicated GUI, and
to control the control pins of the device.
STEVAL-MKI036V1
www.st.com
Obsolete Product(s) - Obsolete Product(s)
