EEA-GA1HR47

Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA
– EEE-107 –
0D±0.5
0d±0.05
F±0.5
Sleeve
14 min.
3 min.
L±1.0
+
Features
Endurance : 105 °C 1000 h
RoHS directive compliant
Radial Lead Type
Series:
GA
Type:
A
Speci cations
Category Temp. Range 55 °C to +105 °C
Rated W.V. Range 10 V.DC to 50 V.DC
Nominal Cap. Range 1.5 μF to 220 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I
<
0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan
d
Please see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 1000 hours, when
the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Capacitance change ±20 % of initial measured value
tan
d
<
200 % of initial specifi ed value
DC leakage current
<
initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Di men sions in mm(not to scale)
Body Dia.
0
D4 5 6.3 8
Lead Dia.
0
d 0.45 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 2.5
W.V.(V.DC) Cap (μF)
Frequency (Hz)
60 120 1 k 10 k 100 k to
10 to 50 1.5 to 220 0.85 1.00 1.30 1.40 1.55
Frequency correction factor for ripple current
(Unit : mm)
02 Oct. 2013
Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA
– EEE-108 –
Standard Prod ucts
W.V.
Cap.
20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan
d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
B
Taping
H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
10
22 4 7 30 0.22 1000 0.45 1.5 5.0 2.5
EEAGA1A220( )
200 2000
33 5 7 50 0.22 1000 0.45 2.0 5.0 2.5
EEAGA1A330( )
200 2000
47 6.3 7 65 0.22 1000 0.45 2.5 5.0 2.5
EEAGA1A470( )
200 2000
68 6.3 7 75 0.22 1000 0.45 2.5 5.0 2.5
EEAGA1A680( )
200 2000
100 6.3 7 110 0.22 1000 0.45 2.5 5.0 2.5
EEAGA1A101( )
200 2000
220 8 7 160 0.22 1000 0.45 2.5 5.0 2.5
EEAGA1A221( )
200 1000
16
10 4 7 30 0.18 1000 0.45 1.5 5.0 2.5
EEAGA1C100( )
200 2000
15 4 7 33 0.18 1000 0.45 1.5 5.0 2.5
EEAGA1C150( )
200 2000
22 5 7 50 0.18 1000 0.45 2.0 5.0 2.5
EEAGA1C220( )
200 2000
33 6.3 7 65 0.18 1000 0.45 2.5 5.0 2.5
EEAGA1C330( )
200 2000
47 6.3 7 77 0.18 1000 0.45 2.5 5.0 2.5
EEAGA1C470( )
200 2000
100 8 7 120 0.18 1000 0.45 2.5 5.0 2.5
EEAGA1C101( )
200 1000
25
10 4 7 33 0.16 1000 0.45 1.5 5.0 2.5
EEAGA1E100( )
200 2000
15 5 7 45 0.16 1000 0.45 2.0 5.0 2.5
EEAGA1E150( )
200 2000
22 5 7 50 0.16 1000 0.45 2.0 5.0 2.5
EEAGA1E220( )
200 2000
33 6.3 7 75 0.16 1000 0.45 2.5 5.0 2.5
EEAGA1E330( )
200 2000
68 8 7 100 0.16 1000 0.45 2.5 5.0 2.5
EEAGA1E680( )
200 1000
35
6.8 4 7 33 0.13 1000 0.45 1.5 5.0 2.5
EEAGA1V6R8( )
200 2000
10 5 7 35 0.13 1000 0.45 2.0 5.0 2.5
EEAGA1V100( )
200 2000
15 6.3 7 50 0.13 1000 0.45 2.5 5.0 2.5
EEAGA1V150( )
200 2000
22 6.3 7 70 0.13 1000 0.45 2.5 5.0 2.5
EEAGA1V220( )
200 2000
47 8 7 96 0.13 1000 0.45 2.5 5.0 2.5
EEAGA1V470( )
200 1000
50
0.1 4 7 1.1 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR10( )
✽✽✽
200 2000
0.15 4 7 1.7 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR15( )
✽✽✽
200 2000
0.22 4 7 2.3 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR22( )
✽✽✽
200 2000
0.33 4 7 3.5 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR33( )
✽✽✽
200 2000
0.47 4 7 5 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR47( )
✽✽✽
200 2000
0.68 4 7 7 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR68( )
✽✽✽
200 2000
1 4 7 10 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H1R0( )
✽✽✽
200 2000
1.5 4 7 16 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H1R5( )
200 2000
2.2 4 7 18 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H2R2( )
200 2000
3.3 4 7 22 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H3R3( )
200 2000
4.7 4 7 26 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H4R7( )
200 2000
6.8 5 7 35 0.10 1000 0.45 2.0 5.0 2.5
EEAGA1H6R8( )
200 2000
10 6.3 7 39 0.10 1000 0.45 2.5 5.0 2.5
EEAGA1H100( )
200 2000
15 6.3 7 55 0.10 1000 0.45 2.5 5.0 2.5
EEAGA1H150( )
200 2000
22 8 7 70 0.10 1000 0.45 2.5 5.0 2.5
EEAGA1H220( )
200 1000
33 8 7 91 0.10 1000 0.45 2.5 5.0 2.5
EEAGA1H330( )
200 1000
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch
B=5 mm, H=2.5 mm.
Suffi x "BQ" for
0
8×7, 5mm pitch products
· Please refer to the page of “Taping Dimensions”.
✽✽✽
Please kindly accept last shipment : 31/Mar/2015
Endurance : 105 °C 1000 h
02 Oct. 2013

EEA-GA1HR47

Mfr. #:
Manufacturer:
Panasonic
Description:
Cap Aluminum Lytic 0.47uF 50V 20% (4 X 7mm) Radial 1.5mm 5mA 1000h 105°C Bulk
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union