OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

NT-1-1/4-0-SP

P1-P3P4-P6
Page 4 SPECIFICATION RT-510 ISSUE 14
If this document is printed it becomes uncontrolled. Check for the latest revision.
TABLE 1
Tubing Dimensions
AS SUPPLIED RECOVERED
Inside Diameter Inside Diameter Wall Thickness
Size Minimum Maximum Minimum Maximum Nominal
in. mm. in. mm. in. mm. in. mm. in. mm.
1/8 .125 3.18 .061 1.55 .019 0.48 .035 0.91 .027 0.69
3/16 .187 4.75 .100 2.54 .023 0.58 .043 1.09 .033 0.83
1/4 .250 6.35 .143 3.63 .025 0.63 .045 1.14 .035 0.89
3/8 .375 9.52 .214 5.45 .030 0.76 .050 1.27 .040 1.01
1/2 .500 12.70 .286 7.25 .033 0.83 .063 1.60 .048 1.21
5/8 .625 15.87 .357 9.06 .037 0.93 .067 1.70 .052 1.32
3/4 .750 19.05 .428 10.88 .042 1.06 .072 1.82 .057 1.44
7/8 .875 22.22 .500 12.70 .050 1.27 .080 2.03 .065 1.65
1 1.000 25.40 .570 14.48 .050 1.27 .090 2.28 .070 1.77
1-1/4 1.250 31.75 .714 18.13 .067 1.70 .107 2.71 .087 2.20
1-1/2 1.500 38.10 .857 21.76 .075 1.90 .115 2.92 .095 2.41
1-3/4 1.750 44.45 1.000 25.40 .087 2.20 .127 3.22 .107 2.71
2 2.000 50.80 1.140 28.96 .090 2.28 .130 3.30 .110 2.79
3 3.000 76.20 1.710 43.43 .105 2.65 .145 3.67 .125 3.17
4 4.000 101.60 2.280 58.90 .120 3.04 .160 4.05 .140 3.55
TABLE 2
Mandrel Dimensions for Bend Testing
Tubing Size Mandrel Diameter
in. in. mm.
1/8 through 3/16 5/16 7.9
1/4 through 3/8 3/8 9.5
1/2 through 1-3/4 7/16 11.1
2 through 3 7/8 22.2
4 1.0 25.4
SPECIFICATION RT-510 ISSUE 14 Page 5
If this document is printed it becomes uncontrolled. Check for the latest revision.
TABLE 3
Requirements
PROPERTY UNIT REQUIREMENT TEST METHOD
PHYSICAL
Dimensions
inches (mm))
In accordance with table 1
ASTM D 2671
Longitudinal Change percent +1, -5 Section 4.3.1
Tensile Strength psi (MPa) 1500 (10.3) minimum
Section 4.3.2
ASTM D 2671
Ultimate Elongation percent 225 minimum ASTM D2671
Tensile Stress at 100% elongation psi (MPa) 1500 (10.3) maximum ASTM D 412
Specific Gravity --- 1.5 maximum ASTM D 2671
Low Temperature Flexibility
4 hours at -70°C ± 2°C (-94°± 4° F)
--- No cracks ASTM D 2671
Procedure C
Table 2
Heat Shock
4 hours at 200C± 3°C (392°± 5° F)
--- No cracks, flowing
or dripping
ASTM D 2671
Table 2
Heat Resistance
168 hours at
121°C ± 2°C (250 ± 4°F)
Followed by tests for:
---
---
ASTM D 2671
Tensile strength psi (MPa)
1200 (8.3)
Section 4.3.2
ASTM D 2671
Ultimate elongation percent 175 minimum ASTM D 2671
ELECTRICAL
Dielectric Strength
volts/mil (kV/mm)
300 minimum (11.8 )
ASTM D 2671
Volume Resistivity ohm-cm 10
11
minimum ASTM D 2671
CHEMICAL
Copper Mirror Corrosion
16 hours at 150°± 2°C (302°± 4° F)
---
Noncorrosive
ASTM D 2671
Procedure A
Copper Contact Corrosion
16 hours at 150 ± 2°C (302°± 4° F)
No pitting or blackening
of copper
ASTM D 2671
Procedure B
Copper Stability
168 hours at 121°± 2°C (250°± 4° F)
Followed by test for:
---
No brittleness, glazing,
cracking, or severe
discoloration of tubing
Section 4.3.3
Ultimate Elongation percent 175 minimum ASTM D 2671
Flammability
Seconds Self-extinguishing
within 15 seconds;
ASTM D 2671
Procedure A
Fungus Resistance
Followed by tests for:
Tensile Strength
Ultimate Elongation
Dielectric Strength
Fungus Resistance
---
psi (MPa)
percent
volts/mil (kV/mm)
---
---
1500 (10.3) minimum
225 minimum
300 (11.8) minimum
Or
Rating of 1 or less
ISO 846
Method B
Section 4.3.2
ASTM D 2671
ASTM D 2671
ASTM G21
Water Absorption
24 hours at 23°± 2°C (73° ± 4°F)
Percent 1.0 maximum ASTM D 2671
Page 6 SPECIFICATION RT-510 ISSUE 14
If this document is printed it becomes uncontrolled. Check for the latest revision.
TABLE 3
Requirements
(continued)
PROPERTY UNIT REQUIREMENTS TEST METHOD
CHEMICAL (continued)
Fluid Resistance
24 hours at 23°± 2°C
(73° ± 4° F)
JP-8 Fuel (MIL-DTL-83133)
Hydraulic Fluid (MIL-PRF-5606)
Lubricating Oil (MIL-PRF-7808)
De-Icing Fluid ( SAE-AMS-1424)
Water
Followed by tests for:
---
---
ASTM D 2671
Tensile Strength psi (MPa) 1000 (6.9) minimum Section 4.3.2
ASTM D 2671
Dielectric Strength volts/mil (kV/mm) 250 (9.8) minimum ASTM D 2671
P1-P3P4-P6

NT-1-1/4-0-SP

Mfr. #:
Buy NT-1-1/4-0-SP
Manufacturer:
Raychem / TE Connectivity
Description:
Heat Shrink Tubing and Sleeves NT-1-1/4-0-SP PRICED PER FOOT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet